1、 TIA-1037-A (Revision of TIA-1037) May 2012Recommended Minimum Performance Standards for cdma2000Spread Spectrum Systems Repeaters NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, f
2、acilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from
3、manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance wit
4、h the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associate
5、d with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN-1037-A, formulated under the cogn
6、izance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of con
7、tents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and
8、 called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions
9、 of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual h
10、ave been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specificatio
11、n, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance rel
12、ating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other
13、SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any c
14、laims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFR
15、INGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFEC
16、TS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AN
17、D ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY
18、OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0051-A v1.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Initial publication February
19、 2006 Rev A v1.0 Added Japan Radio Law related changes, including BC6 emission, BC3 disband, and BC0 subclasses 2,3 April 2012 3GPP2 C.S0051-A v1.0 CONTENTS i FOREWORD vii NOTES . viii 1 INTRODUCTION 1-1 1.1 Scope 1-1 1.2 Terms and Definitions . 1-1 1.3 References . 1-3 2 CDMA INPUT PORTS MINIMUM ST
20、ANDARDS . 2-1 2.1 Frequency Coverage Requirements 2-1 2.1.1 Definition . 2-1 2.1.2 Method of Measurement 2-1 2.1.3 Minimum Standard . 2-3 2.2 Input Sensitivity 2-4 2.2.1 Definition . 2-4 2.2.2 Method of Measurement 2-4 2.2.3 Minimum Standard . 2-5 2.3 Single Tone Desensitization . 2-5 2.3.1 Definiti
21、on . 2-5 2.3.2 Method of Measurement 2-5 2.3.3 Minimum Standard . 2-7 2.4 Input Intermodulation . 2-8 2.4.1 Definition . 2-8 2.4.2 Method of Measurement 2-8 2.4.3 Minimum Standard . 2-10 3 CDMA OUTPUT PORTS MINIMUM STANDARDS 3-1 3.1 Frequency Tolerance . 3-1 3.1.1 Definition . 3-1 3.1.2 Method of Me
22、asurement 3-1 3.1.3 Minimum Standard . 3-1 3.2 Waveform Quality 3-2 3.2.1 Definition . 3-2 3.2.2 Method of Measurement 3-2 3GPP2 C.S0051-A v1.0 CONTENTS ii 3.2.3 Minimum Standard . 3-2 3.3 Repeater Gain and Coupling Loss . 3-3 3.3.1 Definition 3-3 3.3.2 Method of Measurement 3-3 3.3.3 Minimum Standa
23、rd . 3-3 3.4 Output Power, Linearity and Overload . 3-3 3.4.1 Definition 3-3 3.4.2 Method of Measurement 3-3 3.4.3 Minimum Standard . 3-5 3.5 Output Intermodulation 3-6 3.5.1 Definition 3-6 3.5.2 Method of Measurement 3-6 3.5.3 Minimum Standard . 3-7 3.6 Out-of-Band and Spurious Emissions . 3-7 3.6.
24、1 Receiver Conducted Spurious Emissions . 3-8 3.6.2 Out-of-Band and Spurious Emissions . 3-8 3.6.3 Transmitter Conducted Spurious Emissions . 3-8 3.6.3.1 Definition 3-8 3.6.3.2 Method of Measurement 3-8 3.6.3.3 Minimum Standard . 3-9 3.6.4 Radiated Emissions . 3-10 3.6.4.1 Definition 3-10 3.6.4.2 Me
25、thod of Measurement 3-10 3.6.4.3 Minimum Standard . 3-14 3.6.5 AC Power Line Conducted Emissions 3-15 3.6.5.1 Definition 3-15 3.6.5.2 Method of Measurement 3-15 3.6.5.3 Minimum Standard . 3-16 3.7 Repeater Delay 3-17 3.7.1 Definition 3-17 3.7.2 Method of Measurement 3-17 3.7.3 Minimum Standard . 3-1
26、7 3GPP2 C.S0051-A v1.0 CONTENTS iii 3.8 Exposure of Humans to RF Fields . 3-17 4 CDMA GENERAL REQUIREMENTS . 4-1 4.1 Extreme Test Environment 4-1 4.1.1 Definition . 4-1 4.1.2 Method of Measurement 4-1 4.1.3 Minimum Standard . 4-2 4.2 Vibration . 4-3 4.2.1 Definition . 4-3 4.2.2 Method of Measurement
27、 4-4 4.2.3 Minimum Standard . 4-4 5 CDMA STANDARD TEST CONDITIONS . 5-1 5.1 Test Environment 5-1 5.1.1 Definition . 5-1 5.1.2 Standard Test Environment . 5-1 5.2 General Testing Requirements . 5-1 5.2.1 Operational Requirements . 5-1 5.2.2 Adjustable Passband Span 5-2 5.2.3 Adjustable Supported CDMA
28、 Channels 5-2 5.2.4 Maximum Number of Supported Carriers in a Passband . 5-2 5.2.5 Output Power 5-2 5.2.5.1 Manufacturer Rates Maximum Output Power per Passband: . 5-2 5.2.5.2 Manufacturer Does Not Rate Maximum Output Power per Passband: 5-2 6 TEST DIAGRAMS 6-1 6.1 Test Configurations . 6-1 6.2 CDMA
29、 Test Signal Definition . 6-6 6.3 Technical Requirements for the Test Equipment 6-6 6.3.1 Rho Meter 6-6 6.3.2 CW Generator 6-8 6.3.3 Spectrum Analyzer 6-9 6.3.4 Average Power Meter 6-10 6.3.5 RF Output Load . 6-10 7 OUTPUT PORTS CONDUCTED EMISSIONS LIMITS . 7-1 3GPP2 C.S0051-A v1.0 CONTENTS iv 7.1 L
30、imits for Band Class 0, 2, 5, 7, 9 and 10 . 7-1 7.2 Limits for Band Class 1, 4, 6, 8, 14 and 15 . 7-3 7.3 Limits for Band Class 3 . 7-5 7.4 Additional Limits for Band Class 6 7-7 7.5 Limits for Band Class 11 and 12 . 7-9 7.6 Additional Limits for Band Class 10 7-10 3GPP2 C.S0051-A v1.0 FIGURES v Fig
31、ure 6.1-1 Frequency Coverage Test Diagram 6-1 1 Figure 6.1-2 Input Sensitivity Test Diagram . 6-1 2 Figure 6.1-3 Single Tone Desensitization Test Diagram 6-2 3 Figure 6.1-4 Input Intermodulation Test Diagram 6-2 4 Figure 6.1-5 Frequency Tolerance Test Diagram . 6-3 5 Figure 6.1-6 Waveform Quality Te
32、st Diagram . 6-3 6 Figure 6.1-7 Output Power, Linearity and Overload Test Diagram 6-4 7 Figure 6.1-8 Output Intermodulation Test Diagram . 6-4 8 Figure 6.1-9 Output Ports Conducted Spurious Emissions Test Diagram . 6-5 9 Figure 6.1-10 Repeater Delay . 6-5 10 11 3GPP2 C.S0051-A v1.0 TABLES vi Table 2
33、.1-1 Upper Attenuation and Gain Measurement Intervals . 2-2 1 Table 2.1-2 Lower Attenuation and Gain Measurement Intervals . 2-2 2 Table 2.1-3 Filter Requirements . 2-4 3 Table 2.2-1 Required Repeater Noise Figure . 2-5 4 Table 2.4-1 Input Intermodulation Test Parameters . 2-8 5 Table 2.4-2 Frequenc
34、ies levels for deployment-based input intermodulation tests . 2-10 6 Table 3.4-1 Repeater Mean Output Power Per Carrier; Input Overload Test 7 Conditions . 3-6 8 Table 3.4-2 Repeater Mean Output Power Per Carrier; Extreme Test Conditions 3-6 9 Table 3.6-1 Maximum Allowable Radiated Spurious Emission
35、s for Band Classes 0, 10 1, 7, 10, 14 and 15 . 3-14 11 Table 3.6-2 Maximum Allowable Radiated Spurious Emissions for Band Classes 2, 12 3, 4, 5, 6, 8, 9, 11 and 12 . 3-14 13 Table 4.1-1 Extreme Environmental Requirements 4-3 14 Table 5.1-1 Limits of conditions for Standard Test Environment 5-1 15 Ta
36、ble 6.2-1 CDMA Signal Waveform Requirements 6-6 16 Table 6.3-1 Accuracy of Waveform Quality Measurement Equipment . 6-8 17 Table 7.1-1 Band Class 0, 2, 5, 7, 9, and 10 Spurious Emission Limits . 7-2 18 Table 7.2-1 Band Class 1, 4, 6, 8, 14 and 15 Spurious Emission Limits 7-4 19 Table 7.3-1 Band Clas
37、s 3 Spurious Emissions Limits 7-6 20 Table 7.4-1 Additional Band Class 6 Forward Link Spurious Emission Limits 7-7 21 Table 7.4-2 Additional Band Class 6 Reverse Link Spurious Emission Limits 7-8 22 Table 7.5-1 Band Class 11 and 12 Spurious Emission Limits 7-9 23 Table 7.5-2 Additional Band Class 11
38、 and 12 Reverse Link Spurious Emission Lim 7-10 24 Table 7.6-1 Additional Band Class 10 Spurious Emission Limits for North American 25 Operation . 7-10 26 27 3GPP2 C.S0051-A v1.0 vii FOREWORD 1 (This foreword is not part of this Standard) 2 This Standard was prepared by Technical Specification Group
39、 C of the Third Generation 3 Partnership Project 2 (3GPP2). This Standard contains recommended minimum 4 performance standards for cdma20001Repeaters. 5 6 1cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2.
40、 Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States 3GPP2 C.S0051-A v1.0 viii NOTES 1 1. This Standard uses the following verbal forms: “Shall” and “shall not” identify 2 requirements to
41、 be followed strictly to conform to the standard and from which no 3 deviation is permitted. “Should” and “should not” indicate that one of several 4 possibilities is recommended as particularly suitable, without mentioning or 5 excluding others; that a certain course of action is preferred but not
42、necessarily 6 required; or that (in the negative form) a certain possibility or course of action is 7 discouraged but not prohibited. “May” and “need not” indicate a course of action 8 permissible within the limits of the Standard. “Can” and “cannot” are used for 9 statements of possibility and capa
43、bility, whether material, physical, or causal. 10 2. Those wishing to deploy systems compliant with this Standard should also be 11 compliant with local radio regulations. For example, operation within the United 12 States of America shall comply with CFR 47, Parts 2, 15, 22, 24, and 27 of the Code
44、13 of Federal Regulations. 14 3. The following operators define mathematical operations: 15 indicates multiplication. 16 / indicates division. 17 indicates addition.+ 18 indicates subtraction. 19 * indicates complex conjugation. 20 indicates the largest integer less than or equal to x: 1.1 1, 1.0 1.
45、x= 21 indicates the absolute value of x: 17 17, 17 17.x = = 22 4. The Standard applies only to Band Classes 0, 1, 2, (Band Subclasses 0, 1, and 2), 3, 23 4, 5 (Band Subclasses 0 through 7), 6, 7, 8, 9, 10 (Band Subclasses 0 through 4), 24 11 (Band Subclasses 0 through 5), and 12 (Band Subclasses 0 a
46、nd 1) as defined in 25 3. Operation with other band classes and band subclasses may not be supported 26 by this Standard. 27 3GPP2 C.S0051-A v1.0 1-1 1 INTRODUCTION 1 1.1 Scope 2 This Standard details definitions, methods of measurement, and minimum performance 3 requirements for Code Division Multi
47、ple Access (CDMA) repeaters. This Standard shares 4 the purpose of 2 and 4 (and subsequent revisions thereof) by ensuring that a mobile 5 station can obtain service in any system that meets the compatibility requirements of 2 6 and 4. 7 Compatibility, as used in connection with this Standard, 2 and
48、4, is understood to mean 8 that any mobile station is able to place and receive calls in any system. Conversely, all 9 systems are able to place and receive calls with any mobile station. 10 This Standard details definitions, methods of measurement, and minimum performance 11 requirements for Code D
49、ivision Multiple Access (CDMA) Repeaters. Test methods are 12 recommended in this document; however, methods other than those recommended may 13 suffice for the same purpose. 14 1.2 Terms and Definitions 15 AGC. (Automatic Gain Control). A feature that automatically adjusts the gain of the 16 repeater based on changes to a signal level. 17 ALC. (Automatic Level Control). A feature that automatically adjusts the level of the 18 output signal of the repeater to compensate for changes in the input signal level. 19 Band Class. A set of frequency
