1、 TIA-1036-D August 2014Interoperability Specification for cdma2000 Air Interface NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of
2、products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming t
3、o such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI)
4、 patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requir
5、ements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by
6、TIA or this committee of the products or services of the company. (From Project No. TIA-PN-1036-D, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the
7、Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes
8、no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any oblig
9、ation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable
10、 or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“oth
11、er SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards)
12、 then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3)
13、of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not
14、enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION,
15、 ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE
16、CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL
17、NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR TH
18、E LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD
19、NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0044-D v1.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Initial Publication October, 2004 Rev A v1.0 Revision Augest, 2007 Rev B v1.0 Revision July, 2011 Rev C v1.0 Revision Augest, 2012 Rev C v1.0 Republication to clari
20、fy Annex normative or informative issue October, 2012 Rev D v1.0 Add 1x Rev.F releated tests March, 2014 Rev D v1.0 Re-published to address some pdf generate bugs July, 2014 3GPP2 C.S0044-D v1.0 i CONTENTS 1 FOREWORD xv 2 Introduction . xv 3 Testing Objective xv 4 Execution Strategy xv 5 Supplementa
21、ry Terms and Definitions . xvi 6 Tolerances . xxxi 7 References . xxxi 8 1 Miscellaneous Air Interface Tests 1-1 9 1.1 Call Setup under Various PSIST Settings . 1-1 10 1.2 Registration Attempts with Different PSIST Settings. 1-6 11 1.3 Short Message Service with Different PSIST Settings 1-8 12 1.4 Q
22、uick Paging Channel CCI 1-10 13 1.5 Mobile Station Response to Status Request Message . 1-12 14 1.6 SYNC Channel Support for Mobile Stations not capable of TD, or not capable of QPCH 15 or RC2 . 1-14 16 1.7 Sync Channel support for Mobile Stations not capable of TD, but capable of QPCH or 17 RC2 1-1
23、6 18 1.8 Sync Channel Support for Mobile Stations capable of TD and QPCH or RC2 . 1-17 19 1.9 Hashing F-CCCH, F-CCCH slot 1-20 20 1.10 CDMA Channel Hashing on F-PCH for Mobile Stations not capable of QPCH or RC221 1-21 22 1.11 CDMA Channel Hashing on F-PCH for Mobile Stations capable of QPCH or RC2
24、1-22 23 1.12 CDMA Channel Hashing on F-BCCH; Mobile Station not capable of either TD or 24 QPCH (RC2) . 1-24 25 1.13 CDMA Channel Hashing on F-BCCH; Mobile Station not capable of TD (STS) but 26 capable of QPCH (RC2) . 1-25 27 1.14 CDMA Channel Hashing on F-BCCH; Mobile Station capable of both TD (S
25、TS) and 28 QPCH (RC2) . 1-27 29 1.15 F-CCCH SUPPORT 1-28 30 1.16 Paging Indicator on the Quick Paging Channel 1-29 31 1.17 M2M Capability Support 1-31 32 1.18 Data Burst sent on the REACH. 1-31 33 1.19 Skip Overhead Read . 1-32 34 3GPP2 C.S0044-D v1.0 ii 1.20 Bundling R-SCH Request with Origination
26、Message 1-33 1 2 Basic Call Processing Tests 2-1 2 2.1 Mobile Originated Voice Calls . 2-1 3 2.2 Mobile Station Terminated Voice Calls . 2-4 4 2.3 Busy Tone 2-8 5 2.4 Mobile Station Origination Call with Inter Band Channel Assignment . 2-8 6 2.5 Mobile Station Terminated Call with Inter Band Channel
27、 Assignment 2-9 7 2.6 DTMF . 2-10 8 2.7 Slot Cycle Index . 2-12 9 2.8 Reverse Radio Link Failure . 2-13 10 2.9 Channel Assignment from CDMA to Analog . 2-15 11 2.10 Network Busy 2-16 12 2.11 Release Order on the Access Channel . 2-16 13 2.12 True IMSI Support, Land Party to Mobile Station Call, Matc
28、hing MCC and IMSI_11_12, 14 True IMSI addressing supported by the base station and mobile station . 2-17 15 2.13 True IMSI Support, Land Party to Mobile Station Call, Matching MCC and IMSI_11_12, 16 True IMSI addressing supported by the base station with MIN-based addressing supported by 17 the mobi
29、le station. . 2-18 18 2.14 True IMSI Support, Land Party to Mobile Station Call, Matching MCC and IMSI_11_12, 19 True IMSI addressing not supported by the base station . 2-19 20 2.15 True IMSI Support, Land Party to Mobile Station Call, Different MCC and IMSI_11_1221 2-20 22 2.16 PACA Origination, U
30、ser Terminates While Still In Queue 2-21 23 2.17 PACA Origination, Idle Handoff While in Queue . 2-22 24 2.18 PACA Origination, Traffic Channel Becomes Available 2-23 25 2.19 PACA Origination, Features Interaction 2-24 26 2.20 PACA Origination, Permanent Invocation . 2-25 27 2.21 PACA Origination, P
31、ACA Disabled for Mobile Station 2-27 28 2.22 Service Configuration and Negotiation without SYNC_ID 2-28 29 2.23 Service Configuration and Negotiation with SYNC_ID . 2-32 30 2.24 Intra-Band Channel Assignment . 2-35 31 2.25 Silent-Retry 2-36 32 2.26 MSID, MCC, and IMSI . 2-38 33 2.27 RL RC 8 / FL RC
32、11 Parameter Change using RCPM . 2-41 34 3GPP2 C.S0044-D v1.0 iii 2.28 RL RC 8 / FL RC 11 Parameter Change using GEM 2-43 1 2.29 Forward Link Error with RC11/RC12. 2-45 2 2.30 Traffic Channel Assignment in QoF 2-47 3 2.31 Call recovery Request Message . 2-48 4 2.32 General Overhead Information Messa
33、ge 2-50 5 2.33 SO 33 call set-up with RC 11 and RC 8 2-51 6 2.34 SO 33 Fast Connection Setup 2-53 7 2.35 Direct Channel Assignment . 2-55 8 2.36 Extended Slot Cycle Index 2-55 9 3 Handoff Tests . 3-1 10 3.1 Soft Handoff with Dynamic Threshold . 3-1 11 3.2 Soft Handoff without Dynamic Threshold 3-6 1
34、2 3.3 Hard Handoff Between Frequencies in the Same Band Class . 3-11 13 3.4 Hard Handoff from CDMA to Analog . 3-13 14 3.5 Soft Handoff in Fading . 3-14 15 3.6 Hard Handoff in Fading . 3-18 16 3.7 Hard Handoff Between Different Band Classes 3-21 17 3.8 Hard Handoff with and without Return on Failure
35、 . 3-22 18 3.9 Search Window Size and Offset (Traffic State) . 3-24 19 3.10 Search Window Size and Offset (Idle State) . 3-33 20 3.11 Channel Assignment into Soft Handoff (CASHO) . 3-41 21 3.12 Traffic Channel Preamble during Hard Handoff Between Frequencies in same band . 3-22 42 23 3.13 Hopping Pi
36、lot Beacon 3-44 24 3.14 Hard Handoff between Frequencies with Different Radio Configurations 3-45 25 3.15 Handoff on Same Frequency with Different Radio Configurations . 3-47 26 3.16 Hard Handoff while in the Waiting for Mobile Station Answer Substate . 3-49 27 3.17 Mobile Assisted Inter-Frequency H
37、ard Handoff (CDMA to CDMA) 3-51 28 3.18 Mobile Assisted Inter-Frequency Hard Handoff (CDMA to Analog) 3-53 29 3.19 Hard Handoff between Frequencies with Different Protocol Revisions 3-55 30 4 Power Control 4-1 31 4.1 Forward Traffic Channel Power Control 4-1 32 4.2 Fast Forward Power Control (FFPC)
38、. 4-4 33 3GPP2 C.S0044-D v1.0 iv 4.3 Lowest Rate Reverse Fundamental Channel Gating 4-52 1 4.4 R-FCH Gating during Soft Handoff 4-54 2 5 Registrations 5-1 3 5.1 Power-Up Registration 5-1 4 5.2 Power - Down Registration 5-3 5 5.3 Distance-Based Registration . 5-5 6 5.4 Timer-Based Registration 5-8 7
39、5.5 Parameter-Change Registration 5-9 8 5.6 Zone-Based Registration . 5-11 9 6 Authentication 6-1 10 6.1 Shared Secret Data (SSD) Initialized when A-Key is Changed 6-1 11 6.2 Shared Secret Data Update 6-2 12 6.3 Mismatched A-Keys . 6-4 13 6.4 Activating Voice Privacy on Call Setup . 6-5 14 6.5 Activ
40、ating Voice Privacy at the Mobile Station When a Call Is Active . 6-6 15 6.6 Signaling Message Encryption on Forward Traffic Channel . 6-7 16 6.7 Signaling Message Encryption on Reverse Traffic Channel . 6-8 17 6.8 Hard Handoffs between Base Stations with Signaling Message Encryption Active . 6-10 1
41、8 6.9 Authentication upon Originations 6-11 19 6.10 Hard Handoff from CDMA to Analog with Signaling Message Encryption Active . 6-12 20 7 Service Redirection test cases 7-1 21 7.1 Global Service Redirection between Band Classes 7-1 22 7.2 Global Service Redirection between CDMA and a Non-CDMA System
42、 . 7-2 23 7.3 Global Service Redirection between Channels in the Same Band Class . 7-4 24 7.4 Service Redirection between Band Classes . 7-5 25 7.5 Service Redirection between CDMA and a Non-CDMA System 7-7 26 7.6 Service Redirection between Channels in the Same Band Class . 7-8 27 7.7 Extended Glob
43、al Service Redirection between Band Classes 7-10 28 7.8 Extended Global Service Redirection between CDMA and a Non-CDMA System . 7-11 29 7.9 Extended Global Service Redirection between Channels in the Same Band Class . 7-13 30 8 Short Message Service 8-1 31 8.1 Mobile Station Terminated SMS Tests 8-
44、1 32 3GPP2 C.S0044-D v1.0 v 8.2 Mobile Station Originated SMS Tests . 8-8 1 8.3 Broadcast SMS Delivery on the Common Channel 8-14 2 8.4 Mobile Station Terminated Enhanced Messaging Services EMS Tests: 8-16 3 8.5 Mobile Station Originated Enhanced Messaging Services EMS Tests: 8-25 4 9 Subscriber Cal
45、ling Features. 9-1 5 9.1 Call Forwarding Unconditional (CFU) 9-1 6 9.2 Call Forwarding Busy (CFB) 9-1 7 9.3 Call Forwarding Default (CFD) 9-2 8 9.4 Call Forwarding No Answer (CFNA) . 9-3 9 9.5 Three-Way Calling . 9-4 10 9.6 Call Alerting . 9-5 11 9.7 Calling Party Number for Mobile station Terminate
46、d Call Setup . 9-6 12 9.8 Calling Party Number for Call Waiting . 9-7 13 9.9 Call Waiting 9-8 14 9.10 Voice Mail Message Waiting Notification from the Idle State . 9-9 15 9.11 Voice Mail Message Waiting Notification from the Conversation State 9-10 16 9.12 Calling Party Name Presentation during Call
47、 Setup . 9-11 17 9.13 Calling Name Presentation (CNAP) during Conversation State . 9-12 18 9.14 Display Records sent in the Feature Notification Message. . 9-13 19 9.15 Display Records Sent in the Flash With Information Message . 9-14 20 9.16 Display Records Sent in the Alert with Information Messag
48、e . 9-15 21 9.17 TTY/TDD . 9-16 22 9.18 WLL Call Waiting Indicator Support 9-18 23 9.19 Answer Holding . 9-20 24 9.20 User Selective Call Forwarding . 9-22 25 10 Asynchronous Data and Fax Services . 10-1 26 10.1 Send/Receive Fax . 10-1 27 10.2 Upload/Download Binary File 10-3 28 10.3 Simultaneous Tw
49、o-way File Transfer/Carrier Detect 10-4 29 10.4 Compound AT Command, Initialization and Connection Delay 10-6 30 10.5 Escaping to Command Mode 10-7 31 10.6 Air Interface Data Compression 10-8 32 3GPP2 C.S0044-D v1.0 vi 10.7 RLP Operation in a Poor RF Environment 10-10 1 10.8 RLP Abort and TCP Retransmit Test 10-11 2 10.9 Internet Control Message Protocol (ICMP) Requests/Replies 10-13 3 10.10 Reflection of AT Command Parameters . 10-14 4 11 Low Speed Packet Data 11-1 5 11.1 Forward File Transfer 11-1 6 11.2 Reverse File Transfer 11-1 7 11.3 Bi-directional File Transfer 11-2 8 11.4 Mobi
