1、 TIA-102.CAEB-A (Revision of TIA-102.CAEB) June 2016Project 25 Conformance Profile Level Two-Advanced Conventional Operation NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilit
2、ating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufa
3、cturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the
4、American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with
5、 its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purpo
6、ses and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-102.CAEB-A-D1, formulated under the cognizance of the TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.25 Subcommittee on Compliance Assessment). Publishe
7、d by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. T
8、he use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent app
9、lications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither
10、be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or
11、 provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as
12、 a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SS
13、O for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information
14、 as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, tes
15、t or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR
16、 A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPL
17、ICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF T
18、HE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PR
19、ODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-102.CAEB-A Foreword (This foreword is not par
20、t of this standard.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that the APCO/NASTD/FED will devise a Common System Standard for digital public
21、safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the Compliance Assessment Process and Procedures Task Group (CAPPTG) and the TIA Industry members. This docume
22、nt is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describes a conformance profile for advanced conventional operation utilizing the Common Air Interface meeting the Project 2
23、5 requirements. These definitions are necessary to ensure conformance of radio units and FNE. As other documents describing the conventional and trunking protocols are developed, this document will be subject to change. All reasonable efforts have been made to ensure accuracy, but it should be under
24、stood that conformance tests remain to be developed and proven. TIA-102.CAEB-A i Table of Contents 1 Introduction . 1 2 Scope . 1 2.1 Scope 1 2.2 Nomenclature 2 2.3 Abbreviations . 2 2.4 Revision History . 2 2.5 References 3 2.5.1 Normative References 3 2.5.2 Informative References . 3 3 Overview 3
25、3.1 Conventional Conformance Test Scope . 3 3.2 Conventional Conformance Test Roles 4 3.3 Conventional Conformance Test Pass/Fail Criteria 6 3.4 Conventional Conformance Test Environment . 8 3.4.1 Single-segment Testing 8 3.4.2 Multi-segment Testing 9 3.4.3 Test Environment Requirements . 11 4 Statu
26、s Symbols . 12 5 PCP 2.1.1 Emergency Alarm Operation 12 5.1 Successful Emergency Alarm SU to FNE Repeat Mode 12 5.1.1 Description 12 5.1.2 Pre-Conditions 13 5.1.3 Post-Conditions 13 5.1.4 Procedure . 14 5.1.5 Signaling Parameters . 15 5.2 Successful Emergency Cancel SU to FNE Repeat Mode 16 5.2.1 De
27、scription 16 5.2.2 Pre-Conditions 16 5.2.3 Post-Condition 17 5.2.4 Procedure . 17 5.2.5 Signaling Parameters . 18 6 PCP 2.1.2 Call Alert Operation . 19 6.1 Successful Call Alert SU to SU - Repeat Mode . 19 TIA-102.CAEB-A ii 6.1.1 Description 19 6.1.2 Pre-Conditions 20 6.1.3 Post-Condition 20 6.1.4 P
28、rocedure . 20 6.1.5 Signaling Parameters . 21 6.2 Successful Call Alert - SU to SU - Direct Operation . 23 6.2.1 Description 23 6.2.2 Pre-Conditions 23 6.2.3 Post-Condition 23 6.2.4 Procedure . 24 6.2.5 Signaling Parameters . 25 6.3 Successful Call Alert - FNE to SU - Repeat Mode 25 6.3.1 Descriptio
29、n 25 6.3.2 Pre-Conditions 26 6.3.3 Post-Condition 26 6.3.4 Procedure . 26 6.3.5 Signaling Parameters . 27 6.4 Successful Call Alert - SU to FNE - Repeat Mode 28 6.4.1 Description 28 6.4.2 Pre-Conditions 29 6.4.3 Post-Condition 29 6.4.4 Procedure . 29 6.4.5 Signaling Parameters . 30 7 PCP 2.1.3 Radio
30、 Check Operation 31 7.1 Successful Radio Check SU to SU - Repeat Mode . 31 7.1.1 Description 31 7.1.2 Pre-Conditions 32 7.1.3 Post-Condition 32 7.1.4 Procedure . 32 7.1.5 Signaling Parameters . 34 7.2 Successful Radio Check - SU to SU - Direct Mode 35 7.2.1 Description 35 7.2.2 Pre-Conditions 35 7.2
31、.3 Post-Condition 36 TIA-102.CAEB-A iii 7.2.4 Procedure . 36 7.2.5 Signaling Parameters . 37 7.3 Successful Radio Check - FNE to SU - Repeat Mode 37 7.3.1 Description 37 7.3.2 Pre-Conditions 38 7.3.3 Post-Condition 38 7.3.4 Procedure . 38 7.3.5 Signaling Parameters . 39 8 PCP 2.1.4 Status Operation
32、. 40 8.1 Successful Status Update SU to SU and SU to FNE - Repeat Mode - Destined to a Group . 40 8.1.1 Description 40 8.1.2 Pre-Conditions 41 8.1.3 Post-Condition 41 8.1.4 Procedure . 42 8.1.5 Signaling Parameters . 43 8.2 Successful Status Update SU to SU - Repeat Mode - Destined to a Unit 44 8.2.
33、1 Description 44 8.2.2 Pre-Conditions 44 8.2.3 Post-Condition 45 8.2.4 Procedure . 45 8.2.5 Signaling Parameters . 46 8.3 Successful Status Update - SU to SU - Direct Mode 48 8.3.1 Description 48 8.3.2 Pre-Conditions 48 8.3.3 Post-Condition 49 8.3.4 Procedure . 49 8.3.5 Signaling Parameters . 50 8.4
34、 Successful Status Update - SU to FNE - Repeat Mode - Directed to a Unit . 51 8.4.1 Description 51 8.4.2 Pre-Conditions 51 8.4.3 Post-Condition 52 8.4.4 Procedure . 52 8.4.5 Signaling Parameters . 53 TIA-102.CAEB-A iv 8.5 Successful Status Update - SU to FNE - Repeat Mode - Directed to a Group 54 8.
35、5.1 Description 54 8.5.2 Pre-Conditions 55 8.5.3 Post-Condition 55 8.5.4 Procedure . 55 8.5.5 Signaling Parameters . 57 8.6 Successful Status Query - SU to SU - Repeat Mode . 58 8.6.1 Description 58 8.6.2 Pre-Conditions 58 8.6.3 Post-Condition 59 8.6.4 Procedure . 59 8.6.5 Signaling Parameters . 60
36、8.7 Status Query - SU to SU - Direct Mode 61 8.7.1 Description 61 8.7.2 Pre-Conditions 62 8.7.3 Post-Condition 62 8.7.4 Procedure . 62 8.7.5 Signaling Parameters . 63 8.8 Successful Status Query - FNE to SU - Repeat Mode . 64 8.8.1 Description 64 8.8.2 Pre-Conditions 64 8.8.3 Post-Condition 65 8.8.4
37、 Procedure . 65 8.8.5 Signaling Parameters . 66 9 PCP 2.1.5 Message Operation . 67 9.1 Successful Message Update SU to SU and SU to FNE - Repeat Mode - Destined to a Group . 67 9.1.1 Description 67 9.1.2 Pre-Conditions 68 9.1.3 Post-Condition 68 9.1.4 Procedure . 69 9.1.5 Signaling Parameters . 70 9
38、.2 Successful Message UpdateSU to SU-Repeat Mode-Destined to a Unit . 71 9.2.1 Description 71 TIA-102.CAEB-A v 9.2.2 Pre-Conditions 71 9.2.3 Post-Condition 72 9.2.4 Procedure . 72 9.2.5 Signaling Parameters . 73 9.3 Successful Message Update - SU to SU - Direct Operation . 75 9.3.1 Description 75 9.
39、3.2 Pre-Conditions 75 9.3.3 Post-Condition 75 9.3.4 Procedure . 76 9.3.5 Signaling Parameters . 77 9.4 Successful Message Update - SU to FNE - Repeat Mode - Directed to a Unit77 9.4.1 Description 77 9.4.2 Pre-Conditions 78 9.4.3 Post-Condition 78 9.4.4 Procedure . 78 9.4.5 Signaling Parameters . 79
40、9.5 Successful Message Update - SU to FNE - Repeat Mode - Directed to a Group80 9.5.1 Description 80 9.5.2 Pre-Conditions 81 9.5.3 Post-Condition 81 9.5.4 Procedure . 81 9.5.5 Signaling Parameters . 82 10 PCP 2.1.6 Radio Unit Monitor Operation 83 10.1 Successful Radio Unit Monitor Dispatch SU to SU
41、Repeat Mode. 83 10.1.1 Description 83 10.1.2 Pre-Conditions 84 10.1.3 Post-Condition 84 10.1.4 Procedure . 85 10.1.5 Signaling Parameters . 86 10.2 Successful Radio Unit Monitor Dispatch SU to SU Direct Mode . 88 10.2.1 Description 88 10.2.2 Pre-Conditions 88 10.2.3 Post-Condition 89 TIA-102.CAEB-A
42、vi 10.2.4 Procedure . 89 10.2.5 Signaling Parameters . 90 10.3 Successful Radio Unit Monitor FNE to SU Repeat Mode . 91 10.3.1 Description 91 10.3.2 Pre-Conditions 91 10.3.3 Post-Condition 92 10.3.4 Procedure . 92 10.3.5 Signaling Parameters . 94 11 PCP 2.1.7 RADIO INHIBIT OPERATION . 95 11.1 Succes
43、sful Radio Inhibit - FNE to SU - Repeat Mode 95 11.1.1 Description 95 11.1.2 Pre-Conditions 95 11.1.3 Post-Condition 96 11.1.4 Procedure . 96 11.1.5 Signaling Parameters . 97 12 PCP 2.1.8 Radio Uninhibit Operation 98 12.1 Successful Radio Uninhibit - FNE to SU - Repeat Mode 98 12.1.1 Description 98
44、12.1.2 Pre-Conditions 99 12.1.3 Post-Condition 99 12.1.4 Procedure . 99 12.1.5 Signaling Parameters . 100 13 PCP 2.2.1 Voice Encryption 101 TIA-102.CAEB-A vii List of Figures Figure 1: Test Environment for Single-segment Direct Mode Operation 8 Figure 2: Direct Mode Test Environment Using Conformant
45、 Equipment 9 Figure 3: Test Environment for Conformance Testing of a Repeating Fixed Station with Multiple SUs 10 Figure 4: Repeating Fixed Station Mode Test Environment Using Conformant Equipment 11 Figure 5: Emergency Alarm SU to FNE Repeat Mode. 14 Figure 6: Emergency Cancel SU to FNE Repeat Mode
46、 . 18 Figure 7: Call Alert - SU to SU - Repeat Mode 21 Figure 8: Call Alert SU to SU Direct Mode . 24 Figure 9: Call Alert FNE to SU Repeat Mode 27 Figure 10: Call Alert SU to FNE Repeat Mode 30 Figure 11: Radio Check SU to SU Repeat Mode. 33 Figure 12: Radio Check SU to SU Direct Mode . 36 Figure 1
47、3: Radio Check - FNE to SU Repeat Mode . 39 Figure 14: Status Update SU to SU Repeat Mode To a Group . 42 Figure 15: Status Update SU to SU - Repeat Mode - To a Unit 46 Figure 16: Status Update SU to SU Direct Mode . 50 Figure 17: Status Update SU to FNE Repeat Mode To a Unit 53 Figure 18: Status Up
48、date SU to FNE Repeat Mode To a GID 56 Figure 19: Status Query SU to SU Repeat Mode 60 Figure 20: Status Query SU to SU Direct Mode 63 Figure 21: Status Query FNE to SU Repeat Mode 66 Figure 22: Message Update SU to SU Repeat Mode - To a Group . 69 Figure 23: Message Update SU to SU - Repeat Mode To
49、 a Unit . 73 Figure 24: Message Update SU to SU Direct Mode 76 Figure 25: Message Update SU to FNE Repeat Mode To a Unit 79 Figure 26: Message Update SU to FNE Repeat Mode To a Group 82 Figure 27: Radio Unit Monitor Dispatch SU to SU Repeat Mode . 86 Figure 28: Radio Unit Monitor Dispatch SU to SU Direct Mode . 90 Figure 29: Radio Unit Monitor FNE to SU Repeat Mode . 93 Figure 30: FNE to SU Radio Inhibit 97 Figure 31: FNE to SU Radio Uninhibit 1
