1、 TSB-102.CBAC April 2009 Project 25 Compliance Assessment Summary Test Report Guidelines Transceiver Performance NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interc
2、hangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or s
3、elling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American Nat
4、ional Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or
5、all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0357, formulated under the cognizance of the
6、TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.25 Subcommittee onCompliance Assessment). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICAT
7、IONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS USA and Canada (1-800-525-7052 ) International (303-790-0600) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA.
8、 Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for detai
9、ls on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any othe
10、r form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more par
11、ties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and dis
12、claims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or condition
13、s are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another or
14、ganization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedit
15、ion) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) a
16、nd published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compl
17、iance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES
18、CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO RE
19、PRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AN
20、D ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED U
21、PON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA
22、WITHOUT SUCH LIMITATIONS. TSB-102.CBAC Foreword (This foreword is not part of this bulletin.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that AP
23、CO/NASTD/FED will devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the APCO/TIA Project 25 Interface Committ
24、ee (APIC), the APIC Compliance Assessment Process and Procedures Task Group, and TIA Industry members. This document is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describes
25、formatting guidelines for summary test reports submitted to document Project 25 compliance. As other documents associated with the Project 25 Compliance Assessment Program are developed, this document will be subject to change. This TSB includes one annex.TSB-102.CBAC 1 Table of Contents 1 Introduct
26、ion2 1.1 Scope2 1.2 Revision History.3 1.3 Conventions3 1.4 Informative References3 1.5 Abbreviations and Acronyms4 2 Summary Test Report Contents5 2.1 P25 CAP Letterhead, Title, and Page Count.5 2.2 Test Item Description.6 2.3 Test Information.6 2.4 References7 2.5 Test Cases and Results.7 2.6 Resu
27、lt Definitions.9 2.7 Result Comments.9 ANNEX A Transceiver Performance Summary Test Report Format (Informative)11 List of Figures Figure 1. First Page P25 CAP Letterhead, Title, and Report Number.5 Figure 2. P25 CAP Letterhead, Title Header, and Report Number5 Figure 3. Page Count6 Figure 4. Test It
28、em Description.6 Figure 5. Test Location6 Figure 6. Informative References7 Figure 7. Test Cases and Results8 Figure 8. Test Case Result Definitions9 Figure 9. Test Case Result Comments9 TSB-102.CBAC 2 1 Introduction The intent of the Project 25 (P25) Compliance Assessment Program (P25 CAP) at NIST/
29、OLES at the time of this writing is to facilitate land mobile radio (LMR) communications services identified in the P25 Statement of Requirements (SoR) and addressed in Telecommunications Industry Association (TIA) published standards documents interoperate between manufacturers due to those manufac
30、turers adhering to the published standards describing these services. Numerous documents discuss the P25 CAP tests deemed necessary by the industry and user members participating in the work of the P25 Compliance Assessment Process and Procedures Task Group (CAPPTG). The CAPPTG includes TIA members
31、and representatives of Federal, State and Local Public Safety agencies and organizations. This group, being familiar with the relevant published standards, available P25 equipment and test equipment and the general intentions of the P25 CAP, reviews all tests and performance recommendations. This Te
32、lecommunications Systems Bulletin (TSB) outlines the content format for summary test reports submitted to document P25 compliance. This document was drafted and reviewed within the APCO/TIA Project 25 Interface Committee (APIC), Compliance Assessment Process and Procedures Task Group. 1.1 Scope To i
33、dentify uniform format guidelines for use in preparation of a summary test report submitted to the P25 CAP office and other relevant agencies where such LMR summary test reports are intended to document the evaluation of compliance with relevant P25 CAP requirements. TSB-102.CBAC 3 1.2 Revision Hist
34、ory Version Date Description Informal drafts March September, 2008 Determination of the Summary Test Report content guidelines. Draft 1.0 November XX, 2008 Document containing the approved Summary Test Report forms content guidelines in a format appropriate for publication as a TIA Telecommunication
35、s Systems Bulletin. Draft 1.1 June, 2008 Resolution of comments. Draft 1.2 July, 2008 Second round of comment resolution. Draft 1.3 July, 2008 Third round of comment resolution. Draft 1.4 July, 2008 Third round of comment resolution with document identifiers made consistent. Draft 1.5 July, 2008 Fou
36、rth round of comment resolution with MOTs further comments addressed. Draft 1.7 August, 2008 Tyco/MOT comment resolution proposal. Release August, 2008 Consensus reached. Release 2 January, 2009 NIST/OLES comment resolution 1.3 Conventions Throughout this TSB and its annex, gray text is illustrative
37、 to represent variable content. 1.4 Informative References 1 NIST Handbook 153:2007, Laboratory Recognition Process for Project 25 Compliance Assessment1 2 DHS P25 CAP Charter:2008, Charter and Requirements for the Project 25 Compliance Assessment Program2 3 P25-CAB-TEST_REQ August 20083 1 Available
38、 at: http:/www.eeel.nist.gov/oles/Publications/Office_of_Law_Enforcement_Standards.pdf. Cited March 2008. 2 Available at: https:/www.safecomprogram.gov/NR/rdonlyres/D295A545-44A4-4226-AAF7-56A33684908E/0/Project25ComplianceAssessmentProgramCharter.pdf. Cited May 2008 3 Available at: http:/www.safeco
39、mprogram.gov/SAFECOM/currentprojects/project25cap/ TSB-102.CBAC 4 1.5 Abbreviations and Acronyms APCOAssociation of Public-Safety Communications Officials APICAPCO Project 25 Interface Committee CABP25 Compliance Assessment Bulletin CAPP25 Compliance Assessment Program CAPPTGCompliance Assessment Pr
40、ocess and Procedures Task Group DHSDepartment of Homeland Security DTRDetailed Test Report LMRLand Mobile Radio NISTNational Institute of Standards and Technology P25Project 25 SoRStatement of Requirements TIATelecommunications Industry Association TSBTelecommunications Systems Bulletin TSB-102.CBAC
41、 5 2 Summary Test Report Contents This section of the TSB describes each major element or section of the summary test report in a separate subsection. 2.1 P25 CAP Letterhead, Title, and Page Count The first page of the summary test report begins with the P25 logo, about 1.5 inches wide, in the top l
42、eft corner of the page. The P25 CAP label, followed by the summary test title and report identification number4 should appear to the right of the P25 logo. The title of the report always begins with the words Summary Test Report, followed by an em-dash (), followed by the subject of the title. Prroj
43、jectt 25 Complliiance Assessmentt Prrogrram Summary Test Report Transceiver Performance; Trunking Subscriber STR-LMR-123456 Figure 1. First Page P25 CAP Letterhead, Title, and Report Number Each page following the first page in the summary test report carries the P25 CAP letterhead, title, device un
44、der test, and report identification number4 as a header. The P25 logo is proportionately smaller, as is the font size of the P25 CAP letterhead and title. The layout of these elements is the same as on the first page. Prrojjjeecctt 2255 Compllliiiaanccee Asssseessssmeentt Prrogrraam Summary Test Rep
45、ort Transceiver Performance; Trunking Subscriber Wokytoky Portable 25 STR-LMR-123456 Figure 2. P25 CAP Letterhead, Title Header, and Report Number 4 The Summary Test Report identification code format is as follows: STR-. The manufacturer unique identifier is selected by the manufacturer that is issu
46、ing the STR, and should be unique so as not to be confused with another manufacturers STRs. Additionally, the manufacturer document identification # is a number that is chosen by the manufacturer issuing the STR, and is unique to other STRs issued by that same manufacturer. TSB-102.CBAC 6 Each page
47、of the summary test report includes the current page number and the total number of pages (Page # of #). Page 1 of 4 Figure 3. Page Count 2.2 Test Item Description A description of the item tested appears at the top of the document, just below the P25 CAP logo, letterhead, and summary test report ti
48、tle. It includes the name of the manufacturer, manufacturer contact, product name, and installed options. Test Item Description Manufacturer LMR Equipment Corporation Manufacturer Contact Ima Manufacturer - (303) 555-1212 Product Name Wokytoky 25 Portable Installed Options LMR Equipment Corp. Versio
49、n 4.35 Figure 4. Test Item Description 2.3 Test Information Laboratory information for the item tested appears following the description of the test item. It includes the P25 CAP laboratory code assigned by DHS based on the recognition process, the date of the test (might be a single date, two or more dates, or a date range), and the date the test report was issued. If multiple laboratories were involved in testing the specified product, this table will be reproduced with each laboratorys relevant information. Test Information P25 CAP Laboratory Co
