1、 2500 Wilson BoulevardSuite 300Arlington, VA 22201-3834USA+1.703.907.7700FAX +1.703.907.7727The Telecommunications Industry Association represents the communications sector ofFebruary 10, 2005 SUBJECT: Standards Proposal No. 3-3834-RV3, proposed revision of an existing TIA Standard TIA/EIA-455-B, “S
2、tandard test procedure for fiber optic fibers, cables, transducers, sensors, connecting and terminating devices, and other fiber optic components” (if approved, to be published as TIA-455-C) BACKGROUND: The attached material was prepared by TIA FO-4.5 Subcommittee on Fiber Optic Metrology and was ap
3、proved by the chair of the formulating group. SP-3-3834-RV3 is herewith submitted to TIA membership and others as a step toward standardization. NOTE: Please use the following format for comments: Company Name - Comment No. Type of Comment - Technical or Editorial Reference - Page No., Clause No., L
4、ine Suggested Change - Change From:. To:. Add:, Delete: Rationale for Technical Change COMMENT PERIOD EXPIRES: MARCH 7, 2005 Prior to this date, comments may be submitted for consideration as noted on page two of this form. Following the expiration of the comment period, and consideration by the rel
5、evant committee, this Proposal will be submitted to the TIA Technical Standards Subcommittee (TSSC) for final approval as to acceptance or rejection of this Standards Proposal. B U I L D I N G G L O B A L C O M M U N I C A T I O N S Copyright Telecommunications Industry Association Provided by IHS u
6、nder license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PLEASE FILL OUT AND SIGN THIS FORM AND RETURN IT WITH ANY COMMENTS TO: TIA Standards Secretariat Telecommunications Industry Assoc. 2500 Wilson Blvd., Suite 300 Arlington, VA 22201-3834 (FAX: 703/
7、907-7727) SUBJECT: Standards Proposal No. 3-3834-RV3, proposed revision of an existing TIA Standard TIA/EIA-455-B, “Standard test procedure for fiber optic fibers, cables, transducers, sensors, connecting and terminating devices, and other fiber optic components” (if approved, to be published as TIA
8、-455-C) COMMENT PERIOD EXPIRES: MARCH 7, 2005 USER PRODUCER USER/PRODUCER GENERAL INTEREST Please circle one only to indicate the most accurate description of the relevance of this Standards Proposal to your company. This information is required by ANSI to process your comments. DATE:_ NAME:_ Please
9、 Print TEL:_ NAME:_ Signature E-MAIL_ COMPANY:_ _ ADDRESS:_ _-page 2-Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE This document is a TIA Engineering Standards Proposal
10、, rather than an interim or final Standard. It is published for purposes of comment and is subject to further review and modification by the TIA Technical Standards Subcommittee (TSSC), which may accept or reject the Standards Proposal. Accordingly, readers of this Standards Proposal are cautioned a
11、gainst relying on information contained therein prior to the adoption of a final standard. TIA disclaims any liability or responsibility for the consequences of such reliance. Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2004 2500 Wilson Boulevard Arlington, VA 22201 All rights reserved Prin
12、ted in U.S.A. PRICE: $67.00Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed (the “Do
13、cument”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by the authors
14、 of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. TIAs functi
15、on is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). TIA does not evaluate, test, verify or investigate the information, accuracy, soundnes
16、s, or credibility of the contents of the Document. In publishing the Document, TIA disclaims any undertaking to perform any duty owed to or for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons or parties reading or i
17、n any way interested in the Document are cautioned that: (a) the Document is a proposal; (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards deve
18、lopment or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents
19、 and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any
20、 claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that pro
21、cedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any c
22、laims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INF
23、RINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFE
24、CTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY A
25、ND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY
26、 OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduc
27、tion or networking permitted without license from IHS-,-,-SP-3-3834-RV3, 24-Jan-2005 To be TIA/EIA-455-C TIA/EIA-455-C Standard test procedure for fiber optic fibers, cables, transducers, sensors, connecting and terminating devices, and other fiber optic components Contents 1. Introduction . . . . .
28、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 3. Numbering system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29、. . . . . . .3 4. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 5. Definitions and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 6. Standard atmospheric conditions . . . . . . . . . . .
30、. . . . . . . . . . . . . . . . . . . . . . .6 7. Metric policy for FOTPs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 8. Format for addenda (FOTPs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 9. International standards and harmon
31、ization . . . . . . . . . . . . . . . . . . . . . . . . . 10 10. Annexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Annex A - Glossary of terms applicable to this standard and its addenda . . . . 11 Annex B - Methods for establishing empi
32、rical equivalence . . . . . . . . . . . . . . . .15 Annex C - Comparison between this standard and IEC or ITU requirements . .27 Annex D Corrections for vacuum wavelength . . . . . . . . . . . . . . . . . . . . . . . . 27 D R A F T Copyright Telecommunications Industry Association Provided by IHS un
33、der license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SP-3-3834-RV3, 24-Jan-2005 To be TIA/EIA-455-C ii This page left blank. D R A F T Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproducti
34、on or networking permitted without license from IHS-,-,-SP-3-3834-RV3, 24-Jan-2005 To be TIA/EIA-455-C iii TIA/EIA-455-C Standard test procedure for fiber optic fibers, cables, transducers, sensors, connecting and terminating devices, and other fiber optic components Foreword (This foreword is infor
35、mative and is not part of this standard.) This document comes from TIA Project No. 3834, and was formulated under the cognizance of TIA FO-6.6 Subcommittee on Optical Fibers and Cables, and TIA FO-6.6.4, Working Group on Measurement Protocols. This document serves as the “umbrella“ for a series of a
36、ddenda, and is common to all test procedures included within Recommended Standard TIA/EIA-455. There are four annexes: two are normative and two are informative. Key words: fiber optic tests procedures (FOTPs), atmospheric conditions, metric policy, format, equivalence NOTE - This document was origi
37、nally published as Recommended Standard TIA/EIA-455. TIA/EIA-455-B is a revision to TIA/EIA-455-A. D R A F T Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SP-3-3834-RV3, 24-Ja
38、n-2005 To be TIA/EIA-455-C iv This page left blank. D R A F T Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SP-3-3834-RV3, 24-Jan-2005 To be TIA/EIA-455-C 1 Standard test proc
39、edure for fiber optic fibers, cables, transducers, sensors, connecting and terminating devices, and other fiber optic components 1 Introduction This document, together with its addenda, provides uniform test procedures for testing fiber optic components intended for, or forming a part of, optical co
40、mmunications and data transmission systems. Neither this document, nor its addenda, provide procedures designed for testing fiber optic systems. For test procedures for fiber optic systems or subsystems, refer to the TIA/EIA-526 series of documents. The test procedures included in the addenda to thi
41、s document are designed to satisfy the broadest possible industry requirements; in general, special test methods are not included. In order to adequately cover these broad industry needs, many of the addenda require that some “option designator,“ some test parameter definition, and/or some pass/fail
42、 criteria to be specified whenever the addendum is called out. Only in special cases (such as specified DoD requirements) are special test details listed in the addendum in addition to the general requirements. Specific test requirements (including DoD requirements) can, of course, be modified by di
43、rection of the Detail Specification so that the particular test can accurately reflect the special test needs (more or less severe than standard) of the component in question. In the event of conflict between the provisions of these test procedures and those of the Detail Specification, the requirem
44、ents of the Detail Specification shall govern. In the terminology of IEC Guide 102 and of EIA EP-11, this document, together with its addenda, is considered to be a Basic Specification. 2 Normative references The following publications contain provisions which, through reference in this text, may co
45、nstitute provisions of this Standard. At the time of publication, the editions indicated were valid. All publications are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the publications indic
46、ated below. D R A F T Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SP-3-3834-RV3, 24-Jan-2005 To be TIA/EIA-455-C 2 2.1 TIA/EIA documents EIA-440-A Fiber Optic Terminology TI
47、A/EIA-587 Fiber Optic Graphic Symbols TIA/EIA-526 Standard Test Procedures for Fiber Optic Systems and Subsystems EIA EP-7-A Style Manual for Standards and Publications of EIA, TIA, and JEDEDC EIA EP-11-A Guide for the Preparation of Specifications in the NECQ-System TSM-6 Authors guide for preparing Fiber Optic Test Procedures (FOTPs) TSB-62 Informative test methods (ITMs) for fiber-optic fibers, cables, opto-electronic sources and detectors, sensors, connecting and terminating devices, and other fiber-optic compo
