1、 TIA/EIA INTERIM STANDARD Enhanced International Dialing, Calling Number Identification TelecommunicationsIndustry Association; July 2000ANSI/TIA/EIA-41-D, Cellular Radiotelecommunications Intersystem Operations;Telecommunications Industry Association; 1997ITU-T Q.763, Signalling System No. 7 ISDN u
2、ser part formats and codes;September 1997.3 ORGANIZATIONThis document is organized as follows: The TIA/EIA-664-508-AModifications section provides the modifications andadditions to the Calling Number Identification Presentation (CNIP) wirelessfeature description for calling number identification and
3、 callback. The TIA/EIA-664-701-AModifications section provides the modifications andadditions to the Mobile Station Functionality wireless feature description forenhanced international dialing, calling number identification and callback. The TIA/EIA-664-801-AModifications section provides the modifi
4、cations andadditions to the System Functionality wireless feature description for enhancedinternational dialing and calling number identification. The TIA/EIA-41.1-DModifications section provides the modifications andadditions to TIA/EIA-41-DChapter 1 for calling party category. The TIA/EIA-41.5-DMo
5、difications section provides the modifications andadditions to TIA/EIA-41-DChapter 5 for calling party category. The TIA/EIA-41.6-DModifications section provides the modifications andadditions to TIA/EIA-41-DChapter 6 for enhanced international dialing, callingnumber identification and callback.TIA/
6、EIA/IS-875Introduction 2 Editorial Conventions1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859604 EDITORIAL CONVENTIONSThe following editorial conventions are used for this Interim Standard: underline: additioncross out: deletion change ba
7、r: indicates additions or deletions new sub-sections are identified in the sub-section heading for clarity, new sub-sections are shown with vertical change bars but are notunderlinedTIA/EIA/IS-87512345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565
8、7585960TIA/EIA-664-508-A Modifications 3 Calling Number Identification Presentation (CNIP)TIA/EIA-664-508-AMODIFICATIONSThis section describes modifications and additions to TIA/EIA-664-508-A, Calling NumberIdentification Presentation (CNIP), for enhanced international dialing, calling numberidentif
9、ication and callback, and calling party category identification.1 Calling Number Identification Presentation (CNIP)Calling Number Identification Presentation (CNIP) provides the number identification ofthe calling party to the called subscriber. One or two numbers may be presented to identifythe cal
10、ling party.Normal Operation With Successful OutcomeWhen the CNIP service is applicable and active, the destination network provides the calledsubscriber with CNI during alerting on incoming calls.For Network Validated Numbers, the calling partys network should transmit enoughnumbering plan digits to
11、 allow other networks and parties to identify the calling number.The number presented should be the same as would be used to reach the calling party(atleast for numbers within World Zone 1). For purpose of automatic callback, the numberpresented shall not require editing while the called subscriber
12、is located in the country inwhich the call was received.It is assumed that the originating network is capable of transmitting up to 15 digits of CPN.It is also assumed that the originating network is capable of transmitting a subaddress, ifprovided by the calling party.It is assumed that the redirec
13、ting network is capable of transmitting up to 15 digits ofredirecting number (RN) information. It is also assumed that the redirecting network iscapable of transmitting a redirecting subaddress, if provided by the redirecting party.For Network Validated Numbers, the redirecting network should transm
14、it enoughnumbering plan digits to allow other networks and parties to identify the redirecting party.The called subscriber, by the CNIP subscription option, may select either the single numberdelivery option (CNIP1) or the two number delivery option (CNIP2). For CNIP1, the “UserProvided, Screening P
15、assed” number shall be presented, if available, otherwise the“Network Provided” number shall be presented, if available. If CNIP2 is specified and twonumbers are available, both the “Network Provided” number and the “User Provided”number shall be presented.If a CPN is known to be an international nu
16、mber, the international nature of the incomingcall may be indicated by pre-pending an international indicator (e.g., +) to the digit stringbeing presented to the subscriber.Omitted text is retained unchanged.TIA/EIA/IS-875Calling Number Identification Presentation (CNIP) 4 TIA/EIA-664-508-A Modifica
17、tions123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960If CNIP is not subscribed (i.e., the No delivery option applies), no CPN value shall bepresented.When two numbers are presented to a subscriber, indications should be provided to thesu
18、bscriber to signify whether each Calling Party Number is user providedor networkprovided, and, if user provided, whether the number is unscreened, verified and passed, orverified and failed. These indications should eliminate subscriber confusion.The remaining text is retained unchanged.TIA/EIA/IS-8
19、75123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960TIA/EIA-664-701-A Modifications 5 Mobile Station FunctionalityTIA/EIA-664-701-AMODIFICATIONSThis section describes modifications and additions to TIA/EIA-664-701-A, Mobile StationFunction
20、ality, for enhanced international dialing, calling number identification and callback,and calling party category identification.1 Mobile Station FunctionalityThis section describes the characteristics of a Mobile Station (MS) model to define theservices and features in this Standard. It includes all
21、 external interfaces within the MSincluding external devices, audible annunciators, visual indications, and subscriberinteraction devices. Not all of these interfaces are electrical in nature.1.1 Digit Entry KeysThe MS shall have a key pad with the following keys for digit entry: , , , , , , , , , ,
22、 and . A key (or equivalent user interfaceconvention) may be included to indicate international dialing. The digit keys should alsoinclude the letters two, three, or four letters as indicated in the following table (NOTE: SeeITU-TRecommendation E.161):Table 1: Letter to Digit Key MappingKey Digit Le
23、tters Notes12 ABC3 DEF4 GHI5 JKL6 MNO7PQRS8 TUV9 WXYZ*0 OPER Should be distinctive from alphabetdesignations on the other keys.#+Omitted text is retained unchanged.1 2 3 45 6 7 8 9 0 * # +TIA/EIA/IS-875Function Keys 6 TIA/EIA-664-701-A Modifications123456789101112131415161718192021222324252627282930
24、3132333435363738394041424344454647484950515253545556575859601.2 Function KeysPlus (Optional)The key (or functional equivalent) is used to indicate an international number. Whenthe Plus function is invoked, the MS user should not have to enter international accessdigits.1.7 Numeric DisplayThe MS shal
25、l have a numeric display to allow the subscriber to enter digits and review thembefore sending them to the base station. The display shall have at least 10 digits. Thedisplay should be capable of displaying the following characters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,0, *, and #, and +.The numeric display
26、 may be used for local features and for some of the applicablealphanumeric display features at the discretion of the MS manufacturer.1.8 Alphanumeric DisplayA mobile station (MS) may provide a display for alphanumeric messages. Such messagesmay be generated by the network to indicate call progress,
27、caller identifications, or otherinteractive services. The initial uses of the display include Calling Number IdentificationPresentation, Call Waiting Identification Presentation, and Message Waiting Notification.The display is also available for local MS functional messages, such as subscriber promp
28、ts,pre-specified number retrieval, stored message retrieval, time and date display, etc. TheShort Message Services may also use the display to generate and display messages.The alphanumeric display may support any or all of the following character sets:ITU T.50 International Reference Alphabet(IRA)
29、(formerly InternationalAlphabet No. 5, or IA5)ISO 8859 Information Processing- 8-bit single octet coded graphic character setsISO 10646 Universal Multiple-Octet Coded Character Set(UCS), BasicMultilingual Plane onlyIS-90 Extended Protocol Message(TIA/EIA/IS-90 Section 3.7.1 and TIA/EIA/IS-90 Appendi
30、x B)Omitted text is retained unchanged.Omitted text is retained unchanged.Omitted text is retained unchanged.+TIA/EIA/IS-875123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960TIA/EIA-664-701-A Modifications 7 Alphanumeric DisplayShift-JIS v
31、ariable 1-2 byte nonmodal encoding for Kanji, Kana, and Latincharacter sets defined in JIS X0201 (1997) 7-bit and 8-bit coded character sets forinformation interchangeand JIS X0208 (1997) 7-bit and 8-bit double byte codedKANJI set for information interchange X0206KS X 1001:1998 variable 1-2 byte enc
32、oding method used in KoreaIf the alphanumeric display supports multiple character sets, then the alphanumeric displayshould be able to accommodate more than one character set in a message.1.8.3 Interactions with Other Wireless ServicesCalling Number Identification PresentationThe Alphanumeric Displa
33、y may be used to identify the calling party of an incoming call tothe called MS. The identification may be one or two numbers. Each number also has thefollowing information:Number:Up to 15 digits. International numbers should bedisplayed in E.164 numberformat (i.e., including thecountry code). The M
34、S may pre-pend an internationalindicator (e.g., +) to the international numberdisplayed.Presentation Indicator: Presentation allowed. This is usually indicated bypresenting the number.Presentation restricted. This may be indicated by asingle letter “P” for “Private.”Number not available. This may be
35、 indicated with asingle letter “O” for “Out of Area.”Screening Indicator: Network provided(N), user provided not screened(U), user provided screening passed(V), userprovided screening failed(F).Type of Number: National, international, subscriber numberindicator.Numbering Plan:Public telephony (CCITT
36、 E.164) or private.Presentation of the calling party name using a reverse Directory Number service is forfurther study.Presentation of the called number is for further study.Omitted text is retained unchanged.Omitted text is retained unchanged.TIA/EIA/IS-875Call Back 8 TIA/EIA-664-701-A Modification
37、s123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Presentation of the first redirecting number (or original called number) is for further study.Presentation of the last redirection number is for further study.Presentation of the connected
38、 number is for further study.1.17 Call BackThe MS may be capable of calling back a number from an incoming call list.It is desirable to allow the subscriber to review the call back number on the numeric oralphanumeric display before actually making the call. However, the call back number shallnot re
39、quire editing before use while the subscriber is located within the country in whichthe call was received.1.18 Storage of Phone NumbersWhen phone numbers are stored in the MSs memory that were entered by a user with the+ indication or were received via CNIP with the international indicator set, thei
40、nternational indication should be preserved for future display and for setting theinternational indicator on callback, whether as a new call origination or as a flash request(e.g., to initiate a 3-way call).Omitted text is retained unchanged.TIA/EIA/IS-87512345678910111213141516171819202122232425262
41、7282930313233343536373839404142434445464748495051525354555657585960TIA/EIA-664-801-A Modifications 9 System FunctionalityTIA/EIA-664-801-AMODIFICATIONSThis section describes modifications and additions to TIA/EIA-664-801-A, SystemFunctionality, for enhanced international dialing, calling number iden
42、tification and callback,and calling party category identification.1 System FunctionalityThe purpose of this section is to define the characteristics of the system with respect tomessaging and indications to the Mobile Station (MS) and to the calling party.1.5 Indications Received from the Mobile Sta
43、tionThe system should be able to receive and process an indication from the MS of theinternational nature of the called number.1.6 Indications Applied Toward the Mobile StationThe following indications may be applied by the system toward the mobile station duringnormal operation and in providing the
44、 features in this Standard, as:a. The MSC may indicate the international nature of an incoming call.b. Calling number identification should be presented to international roamers in theinternational format, whether the calling number is from the country of the servingsystem, the country of the home s
45、ystem or any other country1.Omitted text is retained unchanged.1This will enable the calling number to be stored and later retrieved in the subscribers homecountry.TIA/EIA/IS-875References 10 TIA/EIA-41.1 Modifications1234567891011121314151617181920212223242526272829303132333435363738394041424344454
46、64748495051525354555657585960TIA/EIA-41.1-D ModificationsThis section provides modifications and additions to TIA/EIA-41-D Chapter 1 needed for callingparty category identification.2 REFERENCES2.1 NORMATIVE REFERENCESITU-T Q.763 (Signalling System No. 7 ISDN user part formats and codes); September19
47、97.4 SYMBOLS AND ABBREVIATIONSCPC CallingPartyCategory parameterTIA/EIA/IS-875123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960TIA/EIA-41.5 Modifications 11 MAP OPERATIONSTIA/EIA-41.5-D ModificationsThis section describes modifications an
48、d additions to TIA/EIA-41.5-D for enhancedinternational dialing, calling number identification and callback, and calling party categoryidentification.6.4 MAP OPERATIONS6.4.2.27 LocationRequest(TIA/EIA-41.5-D, page 5-77)The LocationRequest operation is used by an Originating MSC to obtain call treatm
49、entinstructions from the HLR. The call is identified by the dialed MS address digits receivedby the Originating MSC.The LocationRequest operation is initiated with a TCAP INVOKE (LAST). This is carriedby a TCAP QUERY WITH PERMISSION package. The Parameter Set is encoded asfollows:Notes: x. Include to indicate the Calling Partys Category, based on national requirements.LocationRequest INVOKE Parameters Timer: LRTField Value Type Reference NotesIdentifier SET NATIONAL 18 M 6.3.2.1Length variable octets M 6.3.2.1Comments CallingPartyCategory O 6.5.2.g
