1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21713-6 SANS 60335-2-10:2009 Edition 2.1 IEC 60335-2-10:2008 Edition 5.1SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical a
4、ppliances Safety Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines This national standard is the identical implementation of IEC 60335-2-10:2008 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be used in c
5、onjunction with SANS 60335-1. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS.SANS 60
6、335-2-10:2009 Edition 2.1 IEC 60335-2-10:2008 Edition 5.1 Table of changes Change No. Date Scope IEC amdt 1 2008 Amended to replace a cautionary statement in the introduction that covers abnormal operational situations, to add a cautionary statement in the scope with regard to children and disabled
7、persons, and to add a new reference to the bibliography. National foreword This South African standard was approved by National Committee SABS TC 72, Safety of electrical appliances and electronic equipment, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of
8、the WTO/TBT agreement. This SANS document, by reference, forms part of the Compulsory specification for electrical and electronic apparatus, as published by Government Notice No. R. 1079 (Government Gazette 25245) of 1 August 2003. This SANS document was published in April 2009. This SANS document s
9、upersedes SANS 60335-2-10:2003 (edition 2). This standard may only be used and printed by approved subscription and freemailing clients of the SABS. IEC 60335-2-10 Edition 5.1 2008-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Household and similar electrical appliances Safety Part 2-10: Particular
10、 requirements for floor treatment machines and wet scrubbing machines Appareils lectrodomestiques et analogues Scurit Partie 2-10: Rgles particulires pour les appareils de traitement des sols et les machines brosser les sols mouills INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQ
11、UE INTERNATIONALE CB ICS 13.120; 97.080 PRICE CODE CODE PRIX ISBN 2-8318-9751-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale SANS 60335-2-10:2009This standard may only be used and printed by approved subscription
12、and freemailing clients of the SABS. 2 60335-2-10 IEC:2002+A1:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .7 3 Definitions 7 4 General requirement.7 5 General conditions for the tests 7 6 Classification7 7 Marking and instructions.8 8 Protection against access to live pa
13、rts8 9 Starting of motor-operated appliances 8 10 Power input and current .8 11 Heating 8 12 Void8 13 Leakage current and electric strength at operating temperature8 14 Transient overvoltages .8 15 Moisture resistance 9 16 Leakage current and electric strength.9 17 Overload protection of transformer
14、s and associated circuits .9 18 Endurance9 19 Abnormal operation 9 20 Stability and mechanical hazards .9 21 Mechanical strength .10 22 Construction.10 23 Internal wiring.10 24 Components .10 25 Supply connection and external flexible cords 10 26 Terminals for external conductors.10 27 Provision for
15、 earthing .11 28 Screws and connections.11 29 Clearances, creepage distances and solid insulation11 30 Resistance to heat and fire.11 31 Resistance to rusting11 32 Radiation, toxicity and similar hazards11 Annexes .12 Bibliography12 SANS 60335-2-10:2009This standard may only be used and printed by a
16、pproved subscription and freemailing clients of the SABS.60335-2-10 IEC:2002+A1:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines FOREWORD 1) The Internation
17、al Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic
18、fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any
19、 IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standard
20、ization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repre
21、sentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
22、 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional public
23、ations. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an
24、IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inj
25、ury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references
26、cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identi
27、fying any or all such patent rights. This part of International Standard IEC 60335 has been prepared by IEC technical committee 61: Safety of household and similar electrical appliances. This consolidated version of IEC 60335-2-10 consists of the fifth edition (2002) documents 61/2201/FDIS and 61/22
28、82/RVD and its amendment 1 (2008) documents 61/3540/FDIS and 61/3594/RVD. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. It bears the edition number 5.1. A vertical line in the margin shows where the base publication has
29、 been modified by amendment 1. SANS 60335-2-10:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 4 60335-2-10 IEC:2002+A1:2008 The French version of this standard has not been voted upon. This part 2 is to be used in conjunction with the lat
30、est edition of IEC 60335-1 and its amendments. It was established on the basis of the fourth edition (2001) of that standard. NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert t
31、hat publication into the IEC standard: Safety requirements for electric floor treatment machines and wet scrubbing machines. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or
32、“replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbe
33、red starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Cla
34、use 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. The following differences exist in the countries indicated below. 3.1.9: Floor treatment machines are operated on a polished composition tile surface. Upholstery shampooers are operated under load
35、 (USA). 6.1: Appliances for household use shall be class II or class III (Sweden). The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data re
36、lated to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following
37、 publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of the amendment 1 be adopted for implementation nationa
38、lly not earlier than 12 months or later than 36 months from the date of publication. SANS 60335-2-10:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.60335-2-10 IEC:2002+A1:2008 5 INTRODUCTION It has been assumed in the drafting of this Inte
39、rnational Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated a
40、s in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of
41、IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60
42、335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 Thi
43、s means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of applianc
44、es and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of stan
45、dards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An appliance that complies with the text of this standard will not necessarily be consid
46、ered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements
47、 of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. SANS 60335-2-10:2009This standard may only be used and printed by approved subscription and freemailing clients of the
48、 SABS. 6 60335-2-10 IEC:2002+A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric
49、 floor treatment and wet scrubbing machines intended for household and similar purposes, their rated voltage being not more than 250 V. NOTE 101 Examples of floor treatment machines are floor buffers; floor polishers; floor waxers. NOTE 102 Examples of wet scrubbing machines are floor scrubbers; rug shampooers; upholstery shampooers. Appliances not intended for normal household use but that nevertheless may be a source of danger to the public, such as appliances intended to be
