1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-19678-3 SANS 5450:2007Edition 3.1 SOUTH AFRICAN NATIONAL STANDARD Colour fastness of buttons to washing Published by Standards South Afric
4、a 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa 2 SANS 5450:2007 Edition 3.1 Table of changes Change No. Date Scope Amdt 1 2007 Amended to update the test methods for colour fastness
5、to washing.Foreword This South African standard was approved by National Committee StanSA SC 5110.04A, Textile text methods Coloured textiles and colorants, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in Ju
6、ne 2007. This document supersedes SANS 5450:2004 (edition 3). A vertical line in the margin shows where the text has been technically modified by amendment No. 1. SANS 5450:2007 Edition 3.1 1 Contents Page Foreword 1 Scope 3 2 Normative references 3 3 Definitions . 3 4 Principle 4 5 Apparatus and re
7、agents 4 6 Test specimens . 4 7 Procedure 4 8 Evaluation . 4 9 Test report . 5 SANS 5450:2007 Edition 3.1 2 This page is intentionally left blank SANS 5450:2007 Edition 3.1 3 Colour fastness of buttons to washing 1 Scope This standard specifies a method for the determination of the colour fastness o
8、f buttons to washing. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. All standards are subject to revision and, since any reference to a standard is deemed to be a reference to the latest edition of tha
9、t standard, parties to agreements based on this standard are encouraged to take steps to ensure the use of the most recent editions of the standards indicated below. Information on currently valid national and international standards can be obtained from Standards South Africa. SANS 105-A01/ISO 105-
10、A01, Textiles Tests for colour fastness Part A01: General principles of testing. SANS 105-C01/ISO 105-C01, Textiles Tests for colour fastness Part C01: Colour fastness to washing: Test 1. Amdt 1 SANS 105-C02/ISO 105-C02, Textiles Tests for colour fastness Part C02: Colour fastness to washing: Test 2
11、. Amdt 1 SANS 105-C03/ISO 105-C03, Textiles Tests for colour fastness Part C03: Colour fastness to washing: Test 3. Amdt 1 SANS 105-C04/ISO 105-C04, Textiles Tests for colour fastness Part C04: Colour fastness to washing: Test 4. Amdt 1 SANS 105-C05/ISO 105-C05, Textiles Tests for colour fastness Pa
12、rt C05: Colour fastness to washing: Test 5. Amdt 1 SANS 105-C10/ISO 105-C10, Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda. Amdt 1 3 Definitions For the purposes of this standard, the definitions given in SANS 105-A01 apply. SANS 5450:2007 Edition
13、 3.1 4 4 Principle A prescribed number of buttons are sewn onto adjacent fabric and washed in accordance with prescribed washing methods. The change in colour and degree of staining is assessed by means of the appropriate grey scale. Other visible changes in or damage to the buttons are reported. 5
14、Apparatus and reagents As specified in SANS 105-C10, appropriate to the textile fabric of the made-up item onto which the buttons are to be sewn, except that the size of the adjacent fabric(s) is 140 mm 80 mm. Amdt 1 If, as agreed upon, two single-fibre adjacent fabrics are used, then the first adja
15、cent fabric is of the same kind of fibre as that of the fabric of the made-up item onto which the buttons are to be sewn. 6 Test specimens Stitch the appropriate number of buttons (see table 1) onto the first adjacent fabric or multifibre adjacent fabric, as agreed upon, cover the buttons with the s
16、econd adjacent fabric, or a non-dyeable fabric, for example polypropylene if multifibre adjacent fabric is used, and sew the two fabrics together on all four edges and around each button. Table 1 Number of buttons 1 2 Diameter of buttons mm Number of buttons 25 or more 6a Less than 25 12 a Except th
17、at if the buttons are too large for 6 to be sewn onto the adjacent fabric, the maximum number that can be accommodated on the adjacent fabric should be used. 7 Procedure Use the one of the tests specified in SANS 105-C10, appropriate to the textile fabric of the made-up item onto which the buttons a
18、re to be sewn. Amdt 1 8 Evaluation Examine the tested specimens and by means of the grey scales, assess the change in colour of the buttons and the staining of each adjacent fabric or each stripe in the multifibre adjacent fabric, as required. SANS 5450:2007 Edition 3.1 5 9 Test report Report the fo
19、llowing particulars: a) all data needed to identify the sample tested; b) that the test was carried out in accordance with this standard; c) any deviation from this standard; d) the test number used; Amdt 1 e) the adjacent fabric used; and f) the numerical ratings for colour change of each button and for staining of each adjacent fabric or each stripe in the multifibre adjacent fabric, as required. Standards South Africa
