1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22252-9 SANS 14692-2:2009Edition 1 and ISO tech. corr. 1ISO 14692-2:2002Edition 1 and tech. corr. 1SOUTH AFRICAN NATIONAL STANDARD Petrole
4、um and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qualification and manufacture This national standard is the identical implementation of ISO 14692-2:2002 and technical corrigendum 1, and is adopted with the permission of the International Organization for Standardization.
5、 WARNING Can only be read in conjunction with SANS 14692-1. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 14692-2:2009 Edition 1 and ISO tech. corr. 1 ISO 14692-2:2002 Edition 1 and t
6、ech. corr. 1 Table of changes Change No. Date Scope ISO tech. corr. 1 2005 Corrected to include a note and to modify information on quantifying performance in annex D. National foreword This South African standard was approved by National Committee SABS TC 1015, Fibre-reinforced plastics products, i
7、n accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in May 2009. ICS 75.200; 83.140.30 Ref. No. ISO 14692-2:2002/Cor.1:2005(E) ISO 2005 All rights reserved Published in Switzerland INTERNATIONAL STANDARD I
8、SO 14692-2:2002(E) TECHNICAL CORRIGENDUM 1 Published 2005-10-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONPetroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qualification and manufacture TECHNICAL CORRIGENDUM 1 Industr
9、ies du ptrole et du gaz naturel Canalisations en plastique renforc de verre (PRV) Partie 2: Conformit aux exigences de performance et fabrication RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 14692-2 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structure
10、s for petroleum, petrochemical and natural gas industries, Subcommittee SC 6, Processing equipment and systems. SANS 14692-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14692-2:2002/Cor.1:2005(E) 2 ISO 2005 All rights reservedPage
11、 25, 6.8.2.2: Include the following note at the end of the subclause: NOTE An exception to the maximum design temperature is presented in D.2. Page 49, D.2: Replace the 3rd paragraph with the following: If the effects of temperature alone are being considered, it is acceptable to linearly extrapolat
12、e a value of A1between a value of 1 at the qualification test temperature (minimum test temperature is 65 C), Tqual, and 0 at the Tg, i.e. g1qual gTTATT=(D.1) where T is the required design temperature. If A1is extrapolated from the qualification test temperature, then the maximum design temperature
13、 limitations as defined in 6.8.2.2 shall apply. As an exception to the maximum design temperature limitations of 6.8.2.2, if A1is interpolated between two sets of full regression data in accordance with 6.3.2, then the maximum design temperature shall be within 30 of Tg; however the maximum design t
14、emperature shall not exceed the maximum qualification test temperature. SANS 14692-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Reference numberISO 14692-2:2002(E)ISO 2002INTERNATIONAL STANDARD ISO14692-2First edition2002-12-15Petrol
15、eum and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qualification and manufacture Industries du ptrole et du gaz naturel Canalisations en plastique renforc de verre (PRV) Partie 2: Conformit aux exigences de performance et fabrication SANS 14692-2:2009This s tandard may onl
16、y be used and printed by approved subscription and freemailing clients of the SABS .ISO 14692-2:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are e
17、mbedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporat
18、ed. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a p
19、roblem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and micr
20、ofilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2
21、002 All rights reservedSANS 14692-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14692-2:2002(E) ISO 2002 All rights reserved iiiContent Page Foreword. v Introduction . vi 1 Scope 1 2 Normative references . 1 3 Terms and definition
22、s. 3 4 Symbols and abbreviated terms 3 5 Materials of construction and wall thickness limitations . 3 5.1 General. 3 5.2 Fibre 3 5.3 Resin. 3 5.4 Joints 4 5.5 Wall thickness limitations 5 6 Qualification programme 5 6.1 General. 5 6.2 Qualification pressure and temperature. 6 6.3 Effect of temperatu
23、re and chemical resistance . 16 6.4 Optional qualification requirements . 17 6.5 Fire performance. 18 6.6 Electrical conductivity and electrostatic dissipative properties 21 6.7 Additional component properties . 24 6.8 Component data for quality control baseline. 25 7 Preferred dimensions . 26 7.1 N
24、ominal diameters 26 7.2 Bend radii. 27 7.3 Fitting lengths . 27 8 Quality programme for manufacture. 27 8.1 General requirements. 27 8.2 Quality control equipment . 28 8.3 Quality control tests . 28 8.4 Quality control records. 34 9 Component marking . 35 9.1 General. 35 9.2 Requirements 35 10 Handl
25、ing, storage and transportation. 36 11 Documentation 36 11.1 General. 36 11.2 Purchase order documentation. 36 11.3 Qualification documentation . 36 11.4 Production quality control documentation 37 11.5 Installation documentation 38 11.6 Published values. 38 Annex A (informative) Examples of compone
26、nt requirements for qualification 41 Annex B (informative) Pressure qualification test ratios . 43 Annex C (normative) Failure enveloppe. 46 SANS 14692-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14692-2:2002(E) iv ISO 2002 All
27、rights reservedAnnex D (informative) Guidance on determination of partial factors A1and A2for temperature and chemical resistance.48 Annex E (normative) Fire endurance testing .50 Annex F (normative) Modifications to fire reaction test procedures 59 Annex G (normative) Determination of electrostatic
28、 properties of GRP pipe system components61 Annex H (normative) Preferred dimensions 72 Annex I (informative) Example of enquiry sheet75 Annex J (informative) Example of qualification summary form.76 Annex K (normative) Least-square method for calculating the long-term hydrostatic pressure from regr
29、ession data.78 Bibliography86 SANS 14692-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14692-2:2002(E) ISO 2002 All rights reserved vForeword ISO (the International Organization for Standardization) is a worldwide federation of na
30、tional standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Intern
31、ational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the
32、rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by
33、at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14692-2 was prepared by Technical Committee IS
34、O/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 6, Processing equipment and systems. ISO 14692 consists of the following parts, under the general title Petroleum and natural gas industries Glass-reinforced plastics (GRP)
35、piping: Part 1: Vocabulary, symbols, applications and materials Part 2: Qualification and manufacture Part 3: System design Part 4: Fabrication, installation and operation SANS 14692-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 1
36、4692-2:2002(E) vi ISO 2002 All rights reservedIntroduction The objective of this part of ISO 14692 is to enable the purchase of GRP components with known and consistent properties from any source. Main users of the document will be the principal and the manufacturer, certifying authorities and gover
37、nment agencies. SANS 14692-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .INTERNATIONAL STANDARD ISO 14692-2:2002(E) ISO 2002 All rights reserved 1Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 2: Qual
38、ification and manufacture 1 Scope This part of ISO 14692 gives requirements for the qualification and manufacture of GRP piping and fittings in order to enable the purchase of GRP components with known and consistent properties from any source. It is applicable to qualification procedures, preferred
39、 dimensions, quality programmes, component marking and documentation. This part of ISO 14692 is intended to be read in conjunction with ISO 14692-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the editio
40、n cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 834-1, Fire-resistance tests Elements of building construction Part 1: General requirements ISO 1172, Textile-glass-reinforced plastics Prepregs, moulding compounds and lami
41、nates Determination of the textile-glass and mineral-filler content Calcination methods ISO 4901, Reinforced plastics based on unsaturated polyester resin Determination of residual styrene monomer content ISO 6721-1, Plastics Determination of dynamic mechanical properties Part 1: General principles
42、ISO 7822:1990, Textile glass reinforced plastics Determination of void content Loss on ignition, mechanical disintegration and statistical counting methods ISO 10467:1), Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems
43、based on unsaturated polyester (UP) resin ISO 10639:1), Plastics piping systems for water supply, with or without pressure Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin ISO 11357-2, Plastics Differential scanning calorimetry (DSC) Part 2: Determinati
44、on of glass transition temperature 1) To be published. SANS 14692-2:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14692-2:2002(E) 2 ISO 2002 All rights reservedISO 14692-1:2002, Petroleum and natural gas industries Glass-reinforced
45、plastics (GRP) piping Part 1: Vocabulary, symbols, applications and materials ASTM C177, Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus ASTM D257, Standard test methods for DC resistance or conductance of i
46、nsulating materials ASTM D696, Standard test method for coefficient of linear thermal expansion of plastics between 30 C and 30 C with a vitreous silica dilatometer ASTM D1598, Standard test method for time-to-failure of plastic pipe under constant internal pressure ASTM D1599, Standard test method
47、for resistance to short-time hydraulic failure pressure of plastic pipe, tubing, and fittings ASTM D2105, Standard test method for longitudinal tensile properties of “fiberglass” (glass-fiber-reinforced thermosetting-resin) pipe and tube ASTM D2143, Standard test method for cyclic pressure strength
48、of reinforced, thermosetting plastic pipe ASTM D2412, Standard test method for determination of external loading characteristics of plastic pipe by parallel-plate loading ASTM D2583, Standard test method for indentation hardness of rigid plastics by means of a barcol impressor ASTM D2925, Standard t
49、est method for beam deflection of “fiberglass” (glass-fiber-reinforced thermosetting resin) pipe under full bore flow ASTM D2992, Standard practice for obtaining hydrostatic or pressure design basis for “fiberglass” (glass-fiber-reinforced thermosetting-resin) pipe and fittings ASTM D3567, Standard practice for determining dimensions of “fiberglass” (glass-fiber-reinforced thermosetting resin) pipe and fittings ASTM D40