1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2014 SAE InternationalAll rights reserved. No part of this publi
3、cation may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (out
4、side USA)Fax: 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/J3024_201408SURFACE VEHICLERECOMMENDED PRACTICEJ3024 AUG2014Issued 2014-08Product Safety Sign
5、s for Ready Mixed Concrete TrucksRATIONALECommon safety signs recommended by this standard will improve safety by establishing common signs to be used by all manufacturers of ready mixed concrete trucks. Common signs will benefit operators by establishing recognizable reminders of hazards that will
6、be the same no matter who manufactures the product. FOREWORDThis document presents safety signs for use on ready mixed concrete trucks.TABLE OF CONTENTS1. SCOPE 12. REFERENCES 13. DEFINITIONS . 24. GENERAL . 25. SAFETY SIGN TEXT AND ARTWORK 36. NOTES 111. SCOPEThis document presents a catalog of saf
7、ety sign text and artwork that can be used by any ready mixed concrete truck manufacturer to warn of common hazards. 2. REFERENCES2.1 Applicable PublicationsThe following publications form a part of this specification to the extent specified herein. 2.1.1 SAE PublicationAvailable from SAE Internatio
8、nal, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or 724-776-4970 (outside USA), www.sae.org.SAE J2967 Ready Mixed Concrete Truck Recommended PracticeSAE INTERNATIONAL J3024 Issued AUG2014 Page 2 of 112.1.2 ISO PublicationsAvailable from American Natio
9、nal Standards Institute, 25 West 43rd Street, New York, NY 10036-8002, Tel: 212-642-4900, www.ansi.org.ISO 9244 Earth-moving machinery Machine safety labels General PrinciplesISO 7010 Graphical symbols Safety colours and safety signs Registered safety signs2.1.3 Other PublicationsANSI Z535.4 America
10、n National Standard for Product Safety Signs and labelsANSI Z535.6 American National Standard for Product Safety Information in Product Manuals, instructions, and Other Collateral Materials3. DEFINITIONS3.1 Product Safety SignSign, label, or decal affixed to a product that provides safety informatio
11、n concerning the hazard, the degree or level of hazard seriousness, the probable consequence of involvement with the hazard, and how the hazard can be avoided.4. GENERAL4.1 The product safety signs shown in this document are designed for sufficiency of text and graphic size with respect to e ach haz
12、ard. 4.2 Limitations inherent in some reproduction and display technologies may require increased line thickness or other minor modifications of symbols. Such modifications are acceptable provided the symbol is unchanged in its basic graphical elements and remains easily discernible by the operator.
13、4.3 To improve the appearance and perceptibility of a safety sign, or to coordinate with the design of the equipment to which the sign is applied, it may be necessary to change the line thickness or round the corners of a symbol. The graphic designer is free to make such changes, provided that the e
14、ssential perceptual characteristics of the symbol are maintained.4.4 Some of the product safety signs included in this document are provided with “textless” two-panel versions developed using the guidelines found in ISO 7010. These versions may be used in place of the ANSI Z535.4 signs at the option
15、 of the manufacturer.4.5 Symbols on controls and displays shall have good contrast to their background. Pictorials may use either a light symbol on a dark background or a dark symbol on a light background at the manufacturers discretion. When a pictorial image is reversed (for example, from black-on
16、-white to white-on-black and vice versa), it shall be done for the entire pictorial.4.6 Product safety signs should be located as close as practical to the recommended locations.4.7 Reference numbers are provided as a convenience to the organization of this document and need not appear on the final
17、product.4.8 All standard ISO version signs are 6.65 in. tall by 3.35 in. wide.4.9 Font sizes are based on using Microsoft Sans Serif.4.10 All required signs, instruction plates, and labels shall be permanent in nature and securely attached.SAE INTERNATIONAL J3024 Issued AUG2014 Page 3 of 114.11 The
18、signs shall have resistance to damage from UV radiation, temperatures between 30F and 176F (35C and 80C) and exposure to cleaning fluids, oil, fuel, water, hydraulic fluids, or other fluids used on the vehicle.4.12 Text for required signs, instruction plates, and labels shall be provided in the prim
19、ary language of the country of original destination. For equipment originally destined for service in the United States, this language would be English. Given the fact that there are nearly 7000 known languages in the world, it is impractical to provide information in every potential users primary l
20、anguage. If employers hire operators with limited knowledge of thecountries primary language, a training program should account for this.4.13 Colors shall conform to the following specification chartColor PantoneProcess Color sRGBHTML CodeCMYKRGBBlue 2945C 100 52 2 12 0 84 159 00549FGreen 3415C 100
21、5 72 24 0 122 77 007A4DOrange 152C 0 62 100 0 225 112 0 E17000Red 485C 0 93 95 0 213 43 30 D52B1EWhite 0 0 0 0 255 255 255 FFFFFFYellow 109C 0 10 100 0 254 209 0 FED1005. SAFETY SIGN TEXT AND ARTWORKRefNumberHazard LocationSize(in.)Font SizeANSI Version ISO VersionTMMB01Chute Pinch and CrushOne on e
22、ach side of main chute.4.0 x 6.0 18TMMB01GATMMB01GBSAE INTERNATIONAL J3024 Issued AUG2014 Page 4 of 11RefNumberHazard LocationSize(in.)Font SizeANSI Version ISO VersionTMMB02Chute Extensions SecuredVisible to operator storing extension chutes in chute storage area.3.0 x 6.0 16TMMB02GTMMB03Chute Exte
23、nsion Limit 8 FeetOn both sides of main chute, or visible to operator at extension chute storage area.4.0 x 6.0 18TMMB03GTMMB04Chute Extension Limit 12 FeetOn both sides of main chute, or visible to operator at extension chute storage area.4.0 x 6.0 18TMMB04GTMMB05Chute Extension Limit 16 FeetOn bot
24、h sides of main chute, orvisible to operator at extension chute storage area.4.0 x 6.0 18TMMB05GSAE INTERNATIONAL J3024 Issued AUG2014 Page 5 of 11RefNumberHazard LocationSize(in.)Font SizeANSI Version ISO VersionTMMB06Chute Rotation LockVisible to operator near main chute.4.0 x 6.0 21TMMB06GTMMB07
25、Concrete burnsVisible to personnel on side of vehicle where extension chutes are stored.4.0 x 6.0 16TMMB07GTMMB08 Confined SpaceVisible to personnel at any drum access location. Oriented to be seen upright from either side of drum.4.0 x 6.0 11TMMB08GTMMB09Drum Rotation -GeneralVisible near rotating
26、drum or other rotation hazard not identified by other specific signs.2.5 x 6.0 14TMMB09GSAE INTERNATIONAL J3024 Issued AUG2014 Page 6 of 11RefNumberHazard LocationSize(in.)Font SizeANSI Version ISO VersionTMMB10Drum Rotation -At HopperVisible to operator entering washout platform.2.5 x 6.0 14TMMB10G
27、TMMB11 Drum Roller PinchVisible to operator near drum rollers2.5 x 6.0 18TMMB11GTMMB12 Vehicle Rollover Visible to driver 2.0 x 3.0 8TMMB12GTMMB13Power Line ElectrocutionVisible to personnel approaching vehicle from either side.6.0 x 8.0 21TMMB13GSAE INTERNATIONAL J3024 Issued AUG2014 Page 7 of 11Re
28、fNumberHazard LocationSize(in.)Font SizeANSI Version ISO VersionTMMB14Falling Chutes or MaterialOn foldover chute, right side up when chute is in position to discharge material.3.0 x 6.0 14TMMB14GTMMB15 Hot SurfaceVisible to personnel approaching a hot surface2.5 x 5.0 21TMMB15GTMMB16Hydraulic High
29、Pressure LeaksOne sign per vehicle located near the majority of hydraulic components.3.0 x 5.0 11TMMB16GTMMB17 Access MethodsVisible to personnel preparing to climb onto or enter vehicle.3.0 x 5.0 12TMMB17GSAE INTERNATIONAL J3024 Issued AUG2014 Page 8 of 11RefNumberHazard LocationSize(in.)Font SizeA
30、NSI Version ISO VersionTMMB18 Ladder LatchedVisible to personnel preparing to climb ladders with folding sections.2.3 x 4.5 14TMMB18GTMMB19Non-potable waterVisible to personnel near water sources.3.0 x 6.0 18TMMB19GTMMB20 Pressurized TankOn pressurized tank.4.0 x 6.0 18TMMB20GTMMB21Pressurized Tank
31、RegulatorOn pressurized tank if equipped with regulator.3.0 x 6.0 14TMMG21GSAE INTERNATIONAL J3024 Issued AUG2014 Page 9 of 11RefNumberHazard LocationSize(in.)Font SizeANSI Version ISO VersionTMMB22Operating InstructionsOne visible to operator, and one visible to driver.3.0 x 6.0 12TMMB22GTMMB23 No
32、StepOn any horizontal surface that would be tempting to step on but that is not provided with slip resistant surface and hand rails.3.0 x 3.0TMMB23GTMMB24 Riding on TruckVisible to personnel preparing to climb ladders.3.0 x 5.0 18TMMB24GTMMB25 Rotating ShaftsOne sign each side of vehicle on the fram
33、e rail, and any other place where rotating shaft hazard is present.3.0 x 4.0 14TMMB25GSAE INTERNATIONAL J3024 Issued AUG2014 Page 10 of 11RefNumberHazard LocationSize(in.)Font SizeANSI Version ISO VersionTMMB26 Seat Belts Visible to driver 2.0 x 3.0 10TMMB26GTMMB27Extended Tag Axle OperationVisible
34、to service personnel preparing to charge accumulator.2.0 x 3.0 10TMMB27GTMMB28Extended Tag Axle CrushOne sign each side of vehicle visible to someone near the extended tag axle.3.0 x 5.0 18TMMB28GTMMB29 Backing Visible to driver 2.0 x 3.0 10TMMB29GSAE INTERNATIONAL J3024 Issued AUG2014 Page 11 of 11
35、RefNumberHazard LocationSize(in.)Font SizeANSI Version ISO VersionTMMB30Driver to Spotter CommunicationVisible to operators near the discharge end of the vehicle5.0 x 8.0 10 See Below None6. NOTES6.1 Marginal IndiciaA change bar (l) located in the left margin is for the convenience of the user in lo
36、cating areas where technical revisions, not editorial changes, have been made to the previous issue of this document. An (R) symbol to the left of the document title indicates a complete revision of the document, including technical revisions. Change bars and (R) are not used in original publications, nor in documents that contain editorial changes only.PREPARED BY THE SAE READY-MIX CONCRETE TRUCK SAFETY COMMITTEE
