1、 TechAmerica Engineering Bulletin TechAmerica Technical Fellow and Associate Technical Fellow Nomination and Selection Handbook GEIA-OP-0003 April 2007 GEIA-OP-0003NOTICE TechAmerica Engineering Standards and Publications are designed to serve the public interest by eliminating misunderstandings bet
2、ween manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchasers in selecting and obtaining with minimum delay the proper product for their particular needs. Existence of such Standards and Publications shall not in any respect preclude any
3、 member or nonmember of TechAmerica from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TechAmerica members, whether the standard is to be used either dom
4、estically or internationally. Standards and Publications are adopted by TechAmerica in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TechAmerica does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties
5、adopting the Standard or Publication. Technical Publications are distinguished from TechAmerica Standards in that they contain a compilation of engineering data or information useful to the technical community and represent approaches to good engineering practices that are suggested by the formulati
6、ng committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating commit
7、tee to be considered for inclusion in future revisions of this publication are encouraged to do so. It is the intention of the formulating committee to revise and update this publication from time to time as may be occasioned by changes in technology, industry practice, or government regulations, or
8、 for other appropriate reasons. Published by 2011 TechAmerica Standards a simple majority vote is required for passage, a majority of agreements will constitute agreement to the proposed changes Figure 3-1 portrays the above activities. The details of how each of these activities is accomplished are
9、 contained in the following sections and appendices. Task Individual or Group Responsible Nominate TF Candidate Select Candidates Prepare a simple majority vote is required for passage. Figure B-1 portrays the above activities. The details of how each of these activities is accomplished are containe
10、d in the following sections and appendices. Task Individual or Group Responsible Nominate TF Candidate Select Candidates Prepare & Submit Application Review & Score Application Final Review & Select Notify Sponsors Present Fellowship Award(s) Review Lessons Learned & Update Sponsor Prior to Spring Q
11、trly Before Spring Qtrly Nominating Committee Winter Qtrly Candidate Before Spring Qtrly Review and Selection Committee After Spring Qtrly Summer Qtrly Summer TechAmerica Advisor Annual Meeting Participating Committee Chairs Annual Meeting Fellowship Committee Winter Qtrly after Annual Figure B1 Pro
12、cess Roles & Responsibilities This page intentionally left blank.TechAmerica Document Improvement Proposal If, in the review or use of this document, a potential change is made evident for safety, health, or technical reasons please fill in the appropriate information below and mail or FAX to: TechA
13、merica Standards & Technology Department 601 Pennsylvania Ave., NW North Building, Suite 600 Washington, DC 20004-2650 FAX: (703) 525-6694 Document No. Document Title: Submitters Name: Telephone No.: FAX No.: E-mail: Address: Urgency of Change: Immediate: At next revision: Problem Area: a. Clause Number and/or Drawing: b. Recommended Changes: c. Reason/Rationale for Recommendation: Additional Remarks: Signature: Date: For TechAmerica Use Only Responsible Committee: Chairman: Date comments forwarded to Committee Chairman:
