1、 AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) AS85049/11Copyright 2013 SAE International All rights reserved. No part of this
2、 publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4
3、970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2001-07REVISED 2013-02THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.C FEDERAL SUPPLY CLASS 5935 AS85049/11SHEET 1 OF 12 REV. C PROCUREMENT SPECIFICATION: AS85049SAE Technical Standards Boa
4、rd Rules provide that: “This report ispublished by SAE toadvance thestate of technicalandengineering sciences. Theuse ofthisreport is entirelyvoluntary, andits applicability and suitability forany particularuse,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”
5、SAE reviews eachtechnicalreport at least every five years at which time itmay bereaffirmed, revised,orcancelled.SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS85049/11C RATIONALE
6、 REVISION IS REQUIRED TO CORRECT THE ERROR IN THE DOCUMENT TITLE BLOCK FOR AS50151. REVISION IS REQUIRED TO CORRECT THE ERROR IN THE V THREAD DIMENSION FOR DASH NUMBERS 112, 114, 116, AND 118. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT
7、AND THE LATEST ISSUE OF SAE AS85049. FIGURE 1 - CONFIGURATION AND DIMENSIONS AEROSPACE STANDARD AS85049/11SHEET 2 OF 12 REV. C CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-8
8、3723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS DASH NO . CONNECTOR SHELL SIZE CLAMP SIZE A (SEE NOTE 6) STYLE B .125 AS81703 SER 3 MIL-DTL- 26482 SER 2 AS50151 CRIMP MIL-DTL- 83723 SER III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 01 3 - - - 4 .125 (3.18) .250 (6.35) 1 2.00 (50.80) 02 3 - - - 4 .125
9、 (3.18) .250 (6.35) 1 3.00 (76.20) 03 3 - - - 6 .437 (11.10) 2 2.75 (69.85) 04 3 - - - 6 .437 (11.10) 2 3.75 (95.25) 05 - 8 8S 8 4 .125 (3.18) .250 (6.35) 1 2.00 (50.80) 06 - 8 8S 8 4 .125 (3.18) .250 (6.35) 1 3.00 (76.20) 07 - 8 8S 8 6 .250 (6.35) .437 (11.10) 2 2.75 (69.85) 08 - 8 8S 8 6 .250 (6.3
10、5) .437 (11.10) 2 3.75 (95.25) 09 - 10 10S,10SL 10 4 .125 (3.18) .312 (7.92) 1 2.00 (50.80) 10 - 10 10S,10SL 10 4 .125 (3.18) .312 (7.92) 1 3.00 (76.20) 11 - 10 10S,10SL 10 6 .250 (6.35) .437 (11.10) 2 2.75 (69.85) 12 - 10 10S,10SL 10 6 .250 (6.35) .437 (11.10) 2 3.75 (95.25) 13 7 12 12,12S 12 6 .25
11、0 (6.35) .437 (11.10) 1 2.00 (50.80) 14 7 12 12,12S 12 6 .250 (6.35) .437 (11.10) 1 3.00 (76.20) 15 7 12 12,12S 12 10 .350 (8.89) .625 (15.88) 2 2.75 (69.85) 16 7 12 12,12S 12 10 .350 (8.89) .625 (15.88) 2 3.75 (95.25) 17 12 14 14,14S 14 10 .350 (8.89) .575 (14.61) 1 2.00 (50.80) 18 12 14 14,14S 14
12、10 .350 (8.89) .575 (14.61) 1 3.00 (76.20) 19 12 14 14,14S 14 12 .500 (12.70) .750 (19.05) 2 2.75 (69.85) 20 12 14 14,14S 14 12 .500 (12.70) .750 (19.05) 2 3.75 (95.25) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. C REF D DIA MAX E REF V THREAD CLASS 2A F DIA MAX G MAX H MAX 01 1.027 (26.09) .669 (16.9
13、9) 1.06 (26.92) .625-24 UNEF - 3.15 (80.01) 3.51 (89.15) 02 1.027 (26.09) .669 (16.99) 2.06 (52.32) .625-24 UNEF - 4.15 (105.41) 4.51 (114.55) 03 1.027 (26.09) .669 (16.99) 1.81 (45.97) .750-20 UNEF .858 (21.79) 3.90 (99.06) 4.26 (108.20) 04 1.027 (26.09) .669 (16.99) 2.81 (71.37) .750-20 UNEF .858
14、(21.79) 4.90 (124.46) 5.26 (133.60) 05 1.027 (26.09) .617 (15.67) 1.06 (26.92) .625-24 UNEF - 3.15 (80.01) 3.51 (89.15) 06 1.027 (26.09) .617 (15.67) 2.06 (52.32) .625-24 UNEF - 4.15 (105.41) 4.51 (114.55) 07 1.027 (26.09) .617 (15.67) 1.81 (45.97) .750-20 UNEF .858 (21.79) 3.90 (99.06) 4.26 (108.20
15、) 08 1.027 (26.09) .617 (15.67) 2.81 (71.37) .750-20 UNEF .858 (21.79) 4.90 (124.46) 5.26 (133.60) 09 1.027 (26.09) .734 (18.64) 1.06 (26.92) .625-24 UNEF - 3.15 (80.01) 3.51 (89.15) 10 1.027 (26.09) .734 (18.64) 2.06 (52.32) .625-24 UNEF - 4.15 (105.41) 4.51 (114.55) 11 1.027 (26.09) .734 (18.64) 1
16、.81 (45.97) .750-20 UNEF .858 (21.79) 3.90 (99.06) 4.26 (108.20) 12 1.027 (26.09) .734 (18.64) 2.81 (71.37) .750-20 UNEF .858 (21.79) 4.90 (124.46) 5.26 (133.60) 13 1.027 (26.09) .858 (21.79) 1.06 (26.92) .750-20 UNEF - 3.15 (80.01) 3.51 (89.15) 14 1.027 (26.09) .858 (21.79) 2.06 (52.32) .750-20 UNE
17、F - 4.15 (105.41) 4.51 (114.55) 15 1.027 (26.09) .858 (21.79) 1.67 (42.42) 1.000-20 UNEF 1.112 (28.24) 3.90 (99.06) 4.26 (108.20) 16 1.027 (26.09) .858 (21.79) 2.67 (67.82) 1.000-20 UNEF 1.112 (28.24) 4.90 (124.46) 5.26 (133.60) 17 1.027 (26.09) .984 (24.99) .92 (23.37) 1.000-20 UNEF - 3.15 (80.01)
18、3.51 (89.15) 18 1.027 (26.09) .984 (24.99) 1.92 (48.77) 1.000-20 UNEF - 4.15 (105.41) 4.51 (114.55) 19 1.059 (26.90) .984 (24.99) 1.67 (42.42) 1.1875-18 UNEF 1.218 (30.94) 3.93 (99.82) 4.29 (108.97) 20 1.059 (26.90) .984 (24.99) 2.67 (67.82) 1.1875-18 UNEF 1.218 (30.94) 4.93 (125.22) 5.29 (134.37) A
19、EROSPACE STANDARD AS85049/11SHEET 3 OF 12 REV. C CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO . CONNECT
20、OR SHELL SIZE CLAMP SIZE A (SEE NOTE 6) STYLE B .125 AS81703 SERIES 3 MIL-DTL- 26482 SERIES 2 AS50151 CRIMP MIL-DTL- 83723 SER III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 21 19 16 16,16S 16 12 .500 (12.70) .700 (17.78) 1 2.00 (50.80) 22 19 16 16,16S 16 12 .500 (12.70) .700 (17.78) 1 3.00 (76.20) 23
21、19 16 16,16S 16 16 .625 (15.88) .937 (23.80) 2 2.75 (69.85) 24 19 16 16,16S 16 16 .625 (15.88) .937 (23.80) 2 3.75 (95.25) 25 27 18 18 18 10 .350 (8.89) .625 (15.88) 1 2.00 (50.80) 26 27 18 18 18 10 .350 (8.89) .625 (15.88) 1 3.00 (76.20) 27 27 18 18 18 12 .500 (12.70) .750 (19.05) 1 2.00 (50.80) 28
22、 27 18 18 18 12 .500 (12.70) .750 (19.05) 1 3.00 (76.20) 29 27 18 18 18 16 .625 (15.88) .937 (23.80) 2 2.75 (69.85) 30 27 18 18 18 16 .625 (15.88) .937 (23.80) 2 3.75 (95.25) 31 37 20 20 20 10 .350 (8.89) .625 (15.88) 1 3.00 (76.20) 32 37 20 20 20 10 .350 (8.89) .625 (15.88) 1 4.00 (101.60) 33 37 20
23、 20 20 12 .500 (12.70) .750 (19.05) 1 3.00 (76.20) 34 37 20 20 20 12 .500 (12.70) .750 (19.05) 1 4.00 (101.60) 35 37 20 20 20 16 .625 (15.88) .937 (23.80) 2 3.75 (95.25) 36 37 20 20 20 16 .625 (15.88) .937 (23.80) 2 4.75 (120.65) 37 37 20 20 20 20 .875 (22.23) 1.250 (31.75) 2 3.75 (95.25) 38 37 20 2
24、0 20 20 .875 (22.23) 1.250 (31.75) 2 4.75 (120.65) 39 - 22 22 22 10 .350 (8.89) .625 (15.88) 1 3.00 (76.20) 40 - 22 22 22 10 .350 (8.89) .625 (15.88) 1 4.00 (101.60) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. C REF D DIA MAX E REF V THREAD CLASS 2A F DIA MAX G MAX H MAX 21 1.059 (26.90) 1.112 (28.24)
25、 .92 (23.37) 1.1875-18 UNEF - 3.18 (80.77) 3.54 (89.92) 22 1.059 (26.90) 1.112 (28.24) 1.92 (48.77) 1.1875-18 UNEF - 4.18 (106.17) 4.54 (115.32) 23 1.156 (29.36) 1.112 (28.24) 1.67 (42.42) 1.4375-18 UNEF 1.468 (37.29) 4.02 (102.11) 4.38 (111.25) 24 1.156 (29.36) 1.112 (28.24) 2.67 (67.82) 1.4375-18
26、UNEF 1.468 (37.29) 5.02 (127.51) 5.38 (136.65) 25 1.027 (26.09) 1.218 (30.94) .92 (23.37) 1.000-20 UNEF - 3.15 (80.01) 3.51 (89.15) 26 1.027 (26.09) 1.218 (30.94) 1.92 (48.77) 1.000-20 UNEF - 4.15 (105.41) 4.51 (114.55) 27 1.059 (26.90) 1.218 (30.94) .92 (23.37) 1.1875-18 UNEF - 3.18 (80.77) 3.54 (8
27、9.92) 28 1.059 (26.90) 1.218 (30.94) 1.92 (48.77) 1.1875-18 UNEF - 4.18 (106.17) 4.54 (115.32) 29 1.156 (29.36) 1.218 (30.94) 1.67 (42.42) 1.4375-18 UNEF 1.468 (37.29) 4.02 (102.11) 4.38 (111.25) 30 1.156 (29.36) 1.218 (30.94) 2.67 (67.82) 1.4375-18 UNEF 1.468 (37.29) 5.02 (127.51) 5.38 (136.65) 31
28、1.027 (26.09) 1.345 (34.16) 1.92 (48.77) 1.000-20 UNEF - 4.15 (105.41) 4.51 (114.55) 32 1.027 (26.09) 1.345 (34.16) 2.92 (74.17) 1.000-20 UNEF - 5.15 (130.81) 5.51 (139.95) 33 1.059 (26.90) 1.345 (34.16) 1.92 (48.77) 1.1875-18 UNEF - 4.18 (106.17) 4.54 (115.32) 34 1.059 (26.90) 1.345 (34.16) 2.92 (7
29、4.17) 1.1875-18 UNEF - 5.18 (131.57) 5.54 (140.72) 35 1.156 (29.36) 1.345 (34.16) 2.67 (67.82) 1.4375-18 UNEF 1.468 (37.29) 5.02 (127.51) 5.38 (136.65) 36 1.156 (29.36) 1.345 (34.16) 3.67 (93.22) 1.4375-18 UNEF 1.468 (37.29) 6.02 (152.91) 6.38 (162.05) 37 1.375 (34.93) 1.345 (34.16) 2.67 (67.82) 1.7
30、50-18 UNS 1.969 (50.01) 5.24 (133.10) 5.60 (142.24) 38 1.375 (34.93) 1.345 (34.16) 3.67 (93.22) 1.750-18 UNS 1.969 (50.01) 6.24 (158.50) 6.60 (167.64) 39 1.027 (26.09) 1.468 (37.29) 1.92 (48.77) 1.000-20 UNEF - 4.15 (105.41) 4.51 (114.55) 40 1.027 (26.09) 1.468 (37.29) 2.92 (74.17) 1.000-20 UNEF - 5
31、.15 (130.81) 5.51 (139.95) AEROSPACE STANDARD AS85049/11SHEET 4 OF 12 REV. C CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (
32、CONTINUED) DASH NO . CONNECTOR SHELL SIZE CLAMP SIZE A (SEE NOTE 6) STYLE B .125 AS81703 SER 3 MIL-DTL- 26482 SER 2 AS50151 CRIMP MIL-DTL- 83723 SER III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 41 - 22 22 22 12 .500 (12.70) .750 (19.05) 1 3.00 (76.20) 42 - 22 22 22 12 .500 (12.70) .750 (19.05) 1 4.00
33、 (101.60) 43 - 22 22 22 16 .625 (15.88) .937 (23.80) 1 3.00 (76.20) 44 - 22 22 22 16 .625 (15.88) .937 (23.80) 1 4.00 (101.60) 45 - 22 22 22 20 .875 (22.23) 1.250 (31.75) 2 3.75 (95.25) 46 - 22 22 22 20 .875 (22.23) 1.250 (31.75) 2 4.75 (120.65) 47 - 24 24 24 12 .500 (12.70) .750 (19.05) 1 3.00 (76.
34、20) 48 - 24 24 24 12 .500 (12.70) .750 (19.05) 1 4.00 (101.60) 49 - 24 24 24 16 .625 (15.88) .812 (20.62) 1 3.00 (76.20) 50 - 24 24 24 16 .625 (15.88) .812 (20.62) 1 4.00 (101.60) 51 - 24 24 24 16 .625 (15.88) .937 (23.80) 1 3.00 (76.20) 52 - 24 24 24 16 .625 (15.88) .937 (23.80) 1 4.00 (101.60) 53
35、- 24 24 24 20 .875 (22.23) 1.250 (31.75) 2 3.75 (95.25) 54 - 24 24 24 20 .875 (22.23) 1.250 (31.75) 2 4.75 (120.65) 55 - - 28 - 12 .500 (12.70) .750 (19.05) 1 3.00 (76.20) 56 - - 28 - 12 .500 (12.70) .750 (19.05) 1 4.00 (101.60) 57 - - 28 - 16 .625 (15.88) .937 (23.80) 1 3.00 (76.20) 58 - - 28 - 16
36、.625 (15.88) .937 (23.80) 1 4.00 (101.60) 59 - - 28 - 20 .875 (22.23) 1.250 (31.75) 1 3.00 (76.20) 60 - - 28 - 20 .875 (22.23) 1.250 (31.75) 1 4.00 (101.60) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. C REF D DIA MAX E REF V THREAD CLASS 2A F DIA MAX G MAX H MAX 41 1.059 (26.90) 1.468 (37.29) 1.92 (48
37、.77) 1.1875-18 UNEF - 4.18 (106.17) 4.54 (115.32) 42 1.059 (26.90) 1.468 (37.29) 2.92 (74.17) 1.1875-18 UNEF - 5.18 (131.57) 5.54 (140.72) 43 1.156 (29.36) 1.468 (37.29) 1.92 (48.77) 1.4375-18 UNEF - 4.27 (108.46) 4.63 (117.60) 44 1.156 (29.36) 1.468 (37.29) 2.92 (74.17) 1.4375-18 UNEF - 5.27 (133.8
38、6) 5.63 (143.00) 45 1.375 (34.93) 1.468 (37.29) 2.67 (67.82) 1.750-18 UNS 1.969 (50.01) 5.24 (133.10) 5.60 (142.24) 46 1.375 (34.93) 1.468 (37.29) 3.67 (93.22) 1.750-18 UNS 1.969 (50.01) 6.24 (158.50) 6.60 (167.64) 47 1.059 (26.90) 1.593 (40.46) 1.92 (48.77) 1.1875-18 UNEF - 4.18 (106.17) 4.54 (115.
39、32) 48 1.059 (26.90) 1.593 (40.46) 2.92 (74.17) 1.1875-18 UNEF - 5.18 (131.57) 5.54 (140.72) 49 1.156 (29.36) 1.593 (40.46) 1.92 (48.77) 1.4375-18 UNEF - 4.27 (108.46) 4.63 (117.60) 50 1.156 (29.36) 1.593 (40.46) 2.92 (74.17) 1.4375-18 UNEF - 5.27 (133.86) 5.63 (143.00) 51 1.156 (29.36) 1.593 (40.46
40、) 1.92 (48.77) 1.4375-18 UNEF - 4.27 (108.46) 4.63 (117.60) 52 1.156 (29.36) 1.593 (40.46) 2.92 (74.17) 1.4375-18 UNEF - 5.27 (133.86) 5.63 (143.00) 53 1.375 (34.93) 1.593 (40.46) 2.67 (67.82) 1.750-18 UNS 1.969 (50.01) 5.24 (133.10) 5.60 (142.24) 54 1.375 (34.93) 1.593 (40.46) 3.67 (93.22) 1.750-18
41、 UNS 1.969 (50.01) 6.24 (158.50) 6.60 (167.64) 55 1.059 (26.90) 1.969 (50.01) 1.92 (48.77) 1.1875-18 UNEF - 4.16 (105.66) 4.68 (118.87) 56 1.059 (26.90) 1.969 (50.01) 2.92 (74.17) 1.1875-18 UNEF - 5.16 (131.06) 5.68 (144.27) 57 1.156 (29.36) 1.969 (50.01) 1.92 (48.77) 1.4375-18 UNEF - 4.26 (108.20)
42、4.78 (121.41) 58 1.156 (29.36) 1.969 (50.01) 2.92 (74.17) 1.4375-18 UNEF - 5.26 (133.60) 5.78 (146.81) 59 1.375 (34.93) 1.969 (50.01) 1.92 (48.77) 1.750-18 UNS - 4.48 (113.79) 5.00 (127.00) 60 1.375 (34.93) 1.969 (50.01) 2.92 (74.17) 1.750-18 UNS - 5.48 (139.19) 6.00 (152.40) AEROSPACE STANDARD AS85
43、049/11SHEET 5 OF 12 REV. C CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO . CONNECTOR SHELL SIZE CLAMP SI
44、ZE A (SEE NOTE 6) STYLE B .125 AS81703 SER 3 MIL-DTL- 26482 SER 2 AS50151 CRIMP MIL-DTL- 83723 SER III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 61 - - 28 - 24 1.000 (25.40) 1.375 (34.93) 1 3.00 (76.20) 62 - - 28 - 24 1.000 (25.40) 1.375 (34.93) 1 4.00 (101.60) 63 - - 32 - 16 .625 (15.88) .937 (23.80)
45、 1 3.00 (76.20) 64 - - 32 - 16 .625 (15.88) .937 (23.80) 1 4.00 (101.60) 65 - - 32 - 20 .875 (22.23) 1.250 (31.75) 1 3.00 (76.20) 66 - - 32 - 20 .875 (22.23) 1.250 (31.75) 1 4.00 (101.60) 67 - - 32 - 24 1.000 (25.40) 1.375 (34.93) 1 3.00 (76.20) 68 - - 32 - 24 1.000 (25.40) 1.375 (34.93) 1 4.00 (101
46、.60) 69 - - 32 - 28 1.250 (31.75) 1.625 (41.28) 1 3.00 (76.20) 70 - - 32 - 28 1.250 (31.75) 1.625 (41.28) 1 4.00 (101.60) 71 - - 36 - 20 .875 (22.23) 1.250 (31.75) 1 4.00 (101.60) 72 - - 36 - 20 .875 (22.23) 1.250 (31.75) 1 5.00 (127.00) 73 - - 36 - 24 1.000 (25.40) 1.375 (34.93) 1 4.00 (101.60) 74
47、- - 36 - 24 1.000 (25.40) 1.375 (34.93) 1 5.00 (127.00) 75 - - 36 - 28 1.250 (31.75) 1.625 (41.28) 1 4.00 (101.60) 76 - - 36 - 28 1.250 (31.75) 1.625 (41.28) 1 5.00 (127.00) 77 - - 36 - 32 1.437 (36.50) 1.875 (47.63) 2 4.88 (123.95) 78 - - 36 - 32 1.437 (36.50) 1.875 (47.63) 2 5.88 (149.35) 79 - - 4
48、0 - 20 .875 (22.23) 1.250 (31.75) 1 4.00 (101.60) 80 - - 40 - 20 .875 (22.23) 1.250 (31.75) 1 5.00 (127.00) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. C REF D DIA MAX E REF V THREAD CLASS 2A F DIA MAX G MAX H MAX 61 1.500 (38.10) 1.969 (50.01) 1.92 (48.77) 2.000-18 UNS - 4.60 (116.84) 5.12 (130.05) 6
49、2 1.500 (38.10) 1.969 (50.01) 2.92 (74.17) 2.000-18 UNS - 5.60 (142.24) 6.12 (155.45) 63 1.156 (29.36) 2.219 (56.36) 1.92 (48.77) 1.4375-18 UNEF - 4.26 (108.20) 4.78 (121.41) 64 1.156 (29.36) 2.219 (56.36) 2.92 (74.17) 1.4375-18 UNEF - 5.26 (133.60) 5.78 (146.81) 65 1.375 (34.93) 2.219 (56.36) 1.92 (48.77) 1.750-18 UNS - 4.48 (113.79) 5.00 (127.00)
