1、AEROSPACE STANDARD ACCESSORY, ADAPTER, STRAIGHT, CONNECTOR,ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTINGAS81511/14Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any for
2、m or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http
3、:/www.sae.org ISSUED 2014-10THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5935 AS81511/14SHEET 1 OF 6PROCUREMENT SPECIFICATION: AS81511SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse
4、ofthisreportis entirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, is thesole responsibilityoftheuser.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcanc
5、elled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS81511/14RATIONALE THIS DETAIL SPECIFICATION SHEET IS WRITTEN TO PERMIT THE CANCELLATION AND SUPERSESSION OF MIL-C-81511/14 W
6、ITH THIS DOCUMENT. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. FIGURE 1 - CONNECTOR ACCESSORY, ADAPTER, STRAIGHT (FUNCTION A AND B ASSEMBLIES) AEROSPACE STANDARD AS81511/14SHEET 2 OF 6ACCESSORY, ADAPTER,
7、STRAIGHT, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING FIGURE 1A - CONNECTOR ADAPTER, STRAIGHT (FUNCTION C AND D ASSEMBLIES) FIGURE 1B - CONNECTOR ADAPTER, STRAIGHT (DETAILS A AND B) TABLE 1 - FIGURE 1 METRIC EQUIVALENTS INCHES MILLIMETERS INCHES MILLIMETERS
8、 INCHES MILLIMETERS .003 0.08 .122 3.10 .485 12.32 .067 1.70 .128 3.25 .500 12.70 .073 1.85 .235 5.97 .515 13.08 .100 2.54 .265 6.73 .576 14.63 .106 2.69 .470 11.94 .591 15.01AEROSPACE STANDARD AS81511/14SHEET 3 OF 6ACCESSORY, ADAPTER, STRAIGHT, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK D
9、ISCONNECT, ENVIRONMENT RESISTING TABLE 2 - PART NUMBER AND CHARACTERISTICS PARTNUMBER M81511/14- SHELLSIZEFUNCTION SYMBOL (SEE REQ.) CABLE RANGE FTHREAD(CLASS 2B)ODIA.(SEEREQ.) KDIA.(SEEREQ.) MIN.WORKING ROOM LENGTH REF. (SEE REQ.)APPROX. WEIGHT (LB) MIN. MAX. 0018A.062 (1.57) .125 (3.18)1/2-28UNEF.
10、555(14.10).546(13.87).640(16.26).620(15.75)1.125 (28.58) 2.22(56.39) .025002 .125 (3.18) .250 (6.35)003B.062 (1.57) .125 (3.18) 2.72(69.09) .036004 .125 (3.18) .250 (6.35)005A.062 (1.57) .125 (3.18)1.625 (41.28) 2.72(69.09) .028006 .125 (3.18) .250 (6.35)007B.062 (1.57) .125 (3.18) 3.22(81.79) .0390
11、08 .125 (3.18) .250 (6.35)00910A.125 (3.18) .250 (6.35)5/8-28UN .680(17.27).67117.04) .765(19.43).745(18.92)1.125 (28.58) 2.22(56.39) .027010 .250 (6.35) .375 (9.53) .033 011 .375 (9.53) .500 (12.70) .039 012B.125 (3.18) .250 (6.35)2.72(69.09) .038013 .250 (6.35) .375 (9.53) .047 014 .375 (9.53) .50
12、0 (12.70) .052 015A.125 (3.18) .250 (6.35)1.625 (41.28) 2.72(69.09) .031016 .250 (6.35) .375 (9.53) .037 017 .375 (9.53) .500 (12.70) .043 018B.125 (3.18) .250 (6.35)3.22(81.79) .042019 .250 (6.35) .375 (9.53) .051 020 .375 (9.53) .500 (12.70) .056 02114A.250 (6.35) .375 (9.53)7/8-28UN .930(23.62).9
13、21(23.39)1.015(25.78).995(25.27)1.125 (28.58) 2.22(56.39) .036022 .375 (9.53) .500 (12.70) .042 023 .500 (12.70) .625 (15.88) .052 024B.250 (6.35) .375 (9.53)2.72(69.09) .050025 .375 (9.53) .500 (12.70) .055 026 .500 (12.70) .625 (15.88) .063 027A.250 (6.35) .375 (9.53)1.625 (41.28) 2.72(69.09) .043
14、028 .375 (9.53) .500 (12.70) .049 029 .500 (12.70) .625 (15.88) .059 030B.250 (6.35) .375 (9.53)3.22(81.79) .057031 .375 (9.53) .500 (12.70) .062 032 .500 (12.70) .625 (15.88) .070 03316A.250 (6.35) .375 (9.53)1-28UN 1.056(26.82)1.047(26.59)1.140(28.96)1.120(28.45)1.125 (28.58) 2.22(56.39) .038034 .
15、375 (9.53) .500 (12.70) .044 035 .500 (12.70) .625 (15.88) .054 036B .250 (6.35) .375 (9.53)2.72(69.09) .052037 .375 (9.53) .500 (12.70) .057 038 .500 (12.70) .625 (15.88) .065 039A.250 (6.35) .375 (9.53)1.625 (41.28) 2.72(69.09) .045040 .375 (9.53) .500 (12.70) .051 041 .500 (12.70) .625 (15.88) .0
16、61 042B.250 (6.35) .375 (9.53)3.22(81.79) .059043 .375 (9.53) .500 (12.70) .064 044 .500 (12.70) .625 (15.88) .072 04518A.375 (9.53) .500 (12.70)1 1/8-28UN1.180(29.97)1.171(29.74)1.265(32.13)1.245(31.62)1.125 (28.58) 2.22(56.39) .046046 .500 (12.70) .625 (15.88) .057 047 .625 (15.88) .750 (19.05) .0
17、55 048B.375 (9.53) .500 (12.70)2.72(69.09) .059049 .500 (12.70) .625 (15.88) .067 050 .625 (15.88) .750 (19.05) .074 051A.375 (9.53) .500 (12.70)1.625 (41.28) 2.72(69.09) .054052 .500 (12.70) .625 (15.88) .065 053 .625 (15.88) .750 (19.05) .063 054B.375 (9.53) .500 (12.70)3.22(81.79) .067055 .500 (1
18、2.70) .625 (15.88) .075 056 .625 (15.88) .750 (19.05) .082 AEROSPACE STANDARD AS81511/14SHEET 4 OF 6ACCESSORY, ADAPTER, STRAIGHT, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING TABLE 2 - PART NUMBER AND CHARACTERISTICS (CONTINUED) PARTNUMBER M81511/14- SHELLSI
19、ZEFUNCTION SYMBOL (SEE REQ.) CABLE RANGE FTHREAD(CLASS 2B)ODIA.(SEEREQ.) KDIA.(SEEREQ.) MIN.WORKING ROOM LENGTH REF. (SEE REQ.)APPROX. WEIGHT (LB) MIN. MAX. 0578C.062 (1.57) .125 (3.18)1/2-28UNEF.555(14.10) .546(13.87).640(16.26) .620(15.75)1.125(28.58) 1.71(43.43) .022058 .125 (3.18) .250 (6.35)059
20、D.062 (1.57) .125 (3.18) 2.47(62.74) .033060 .125 (3.18) .250 (6.35)061C.062 (1.57) .125 (3.18)1.625(41.28) 2.21(56.13) .025062 .125 (3.18) .250 (6.35)063D.062 (1.57) .125 (3.18) 2.97(75.44) .036064 .125 (3.18) .250 (6.35)06510C.125 (3.18) .250 (6.35)5/8-28UN .680(17.27) .671(17.04).765(19.43) .745(
21、18.92)1.125(28.58) 1.71(43.43) .024066 .250 (6.35) .375 (9.53) .028 067 .375 (9.53) .500 (12.70) .034 068D.125 (3.18) .250 (6.35)2.47(62.74) .035069 .250 (6.35) .375 (9.53) .043 070 .375 (9.53) .500 (12.70) .046 071C.125 (3.18) .250 (6.35)1.625(41.28) 2.21(56.13) .028072 .250 (6.35) .375 (9.53) .032
22、 073 .375 (9.53) .500 (12.70) .038 074D.125 (3.18) .250 (6.35)2.97(75.44) .039075 .250 (6.35) .375 (9.53) .047 076 .375 (9.53) .500 (12.70) .050 07714C.250 (6.35) .375 (9.53)7/8-28UN .930(23.62) .921(23.39)1.015(25.78) .995(25.27)1.125(28.58) 1.71(43.43) .031078 .375 (9.53) .500 (12.70) .037 079 .50
23、0 (12.70) .625 (15.88) .045 080D.250 (6.35) .375 (9.53)2.47(62.74) .046081 .375 (9.53) .500 (12.70) .049 082 .500 (12.70) .625 (15.88) .055 083C.250 (6.35) .375 (9.53)1.625(41.28) 2.21(56.13) .038084 .375 (9.53) .500 (12.70) .044 085 .500 (12.70) .625 (15.88) .052 086D.250 (6.35) .375 (9.53)2.97(75.
24、44) .053087 .375 (9.53) .500 (12.70) .056 088 .500 (12.70) .625 (15.88) .062 08916C.250 (6.35) .375 (9.53)1-28UN 1.056(26.82) 1.047(26.59)1.140(28.96) 1.120(28.45)1.125(28.58) 1.71(43.43) .033090 .375 (9.53) .500 (12.70) .039 091 .500 (12.70) .625 (15.88) .047 092D .250 (6.35) .375 (9.53)2.47(62.74)
25、 .048093 .375 (9.53) .500 (12.70) .051 094 .500 (12.70) .625 (15.88) .057 095C.250 (6.35) .375 (9.53)1.625(41.28) 2.21(56.13) .040096 .375 (9.53) .500 (12.70) .046 097 .500 (12.70) .625 (15.88) .054 098D.250 (6.35) .375 (9.53)2.97(75.44) .056099 .375 (9.53) .500 (12.70) .058 100 .500 (12.70) .625 (1
26、5.88) .064 10118C.375 (9.53) .500 (12.70)1 1/8-28UN1.180(29.97) 1.171(29.74)1.265(32.13) 1.245(31.62)1.125(28.58) 1.71(43.43) .041102 .500 (12.70) .625 (15.88) .049 103 .625 (15.88) .750 (19.05) .047 104D.375 (9.53) .500 (12.70)2.47(62.74) .053105 .500 (12.70) .625 (15.88) .059 106 .625 (15.88) .750
27、 (19.05) .066 107C.375 (9.53) .500 (12.70)1.625(41.28) 2.21(56.13) .049108 .500 (12.70) .625 (15.88) .057 109 .625 (15.88) .750 (19.05) .055 110D.375 (9.53) .500 (12.70)2.97(75.44) .061111 .500 (12.70) .625 (15.88) .067 112 .625 (15.88) .750 (19.05) .074 AEROSPACE STANDARD AS81511/14SHEET 5 OF 6ACCE
28、SSORY, ADAPTER, STRAIGHT, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING TABLE 2 - PART NUMBER AND CHARACTERISTICS (CONTINUED) PARTNUMBER M81511/14- SHELLSIZEFUNCTION SYMBOL (SEE REQ.) CABLE RANGE FTHREAD(CLASS 2B)ODIA.(SEEREQ.) KDIA.(SEEREQ.) MIN.WORKING ROOM
29、 LENGTH REF. (SEE REQ.)APPROX. WEIGHT (LB) MIN. MAX. 11320A.500 (12.70) .625 (15.88)1 1/4-28UN1.305(33.15) 1.296(32.92)1.390(35.31) 1.370(34.80)1.125(28.58) 2.30(58.42) .054114 .625 (15.88) .750 (19.05) .070 115 .750 (19.05) .875 (22.23) .056 116B.500 (12.70) .625 (15.88)2.80(71.12) .066117 .625 (15
30、.88) .750 (19.05) .077 118 .750 (19.05) .875 (22.23) .083 119A.500 (12.70) .625 (15.88)1.625(41.28) 2.80(71.12) .063120 .625 (15.88) .750 (19.05) .089 121 .750 (19.05) .875 (22.23) .065 122B.500 (12.70) .625 (15.88)3.30(83.82) .075123 .625 (15.88) .750 (19.05) .086 124 .750 (19.05) .875 (22.23) .092
31、 12522A.625 (15.88) .750 (19.05)1 3/8-28UN1.430(36.32) 1.421(36.09)1.515(38.48) 1.495(37.97)1.125(28.58) 2.30(58.42) .062126 .750 (19.05) .875 (22.23) .083 127 .875 (22.23) 1.000 (25.40) .057 128B.625 (15.88) .750 (19.05)2.80(71.12) .073129 .750 (19.05) .875 (22.23) .087 130 .875 (22.23) 1.000 (25.4
32、0) .092 131A.625 (15.88) .750 (19.05)1.625(41.28) 2.80(71.12) .072132 .750 (19.05) .875 (22.23) .104 133 .875 (22.23) 1.000 (25.40) .066 134B.625 (15.88) .750 (19.05)3.30(83.82) .083135 .750 (19.05) .875 (22.23) .097 136 .875 (22.23) 1.000 (25.40) .102 13724A.750 (19.05) .875 (22.23)1 1/2-28UN1.555(
33、39.50) 1.546(39.27)1.640(41.66) 1.620(41.15)1.125(28.58) 2.30(58.42) .070138 .875 (22.23) 1.000 (25.40) .096 139 1.000 (25.40) 1.125 (28.58) .058 140B.750 (19.05) .875 (22.23)2.80(71.12) .080141 .875 (22.23) 1.000 (25.40) .097 142 1.000 (25.40) 1.125 (28.58) .101 143A.750 (19.05) .875 (22.23)1.625(4
34、1.28) 2.80(71.12) .083144 .875 (22.23) 1.000 (25.40) .119 145 1.000 (25.40) 1.125 (28.58) .067 146B.750 (19.05) .875 (22.23)3.30(83.82) .083147 .875 (22.23) 1.000 (25.40) .108 148 1.000 (25.40) 1.125 (28.58) .112 14920C.500 (12.70) .625 (15.88)1 1/4-28UN1.305(33.15) 1.296(32.92)1.390(35.31) 1.370(34
35、.80)1.125(28.58) 1.78(45.21) .049150 .625 (15.88) .750 (19.05) .059 151 .750 (19.05) .875 (22.23) .050 152D.500 (12.70) .625 (15.88)2.55(64.77) .058153 .625 (15.88) .750 (19.05) .067 154 .750 (19.05) .875 (22.23) .075 155C.500 (12.70) .625 (15.88)1.625(41.28) 2.28(57.91) .058156 .625 (15.88) .750 (1
36、9.05) .068 157 .750 (19.05) .875 (22.23) .056 158D.500 (12.70) .625 (15.88)3.05(77.47) .066159 .625 (15.88) .750 (19.05) .076 160 .750 (19.05) .875 (22.23) .084 16122C.625 (15.88) .750 (19.05)1 3/8-28UN1.430(36.32) 1.421(36.09)1.515(38.48) 1.495(37.97)1.125(28.58) 1.78(45.21) .057162 .750 (19.05) .8
37、75 (22.23) .069 163 .875 (22.23) 1.000 (25.40) .053 164D.625 (15.88) .750 (19.05)2.55(64.77) .063165 .750 (19.05) .875 (22.23) .075 166 .875 (22.23) 1.000 (25.40) .084 167C.625 (15.88) .750 (19.05)1.625(41.28) 2.28(57.91) .067168 .750 (19.05) .875 (22.23) .079 169 .875 (22.23) 1.000 (25.40) .057 AER
38、OSPACE STANDARD AS81511/14SHEET 6 OF 6ACCESSORY, ADAPTER, STRAIGHT, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING TABLE 2 - PART NUMBER AND CHARACTERISTICS (CONTINUED) PARTNUMBER M81511/14- SHELLSIZEFUNCTION SYMBOL (SEE REQ.) CABLE RANGE FTHREAD(CLASS 2B)ODIA
39、.(SEEREQ.) KDIA.(SEEREQ.) MIN.WORKING ROOM LENGTH REF. (SEE REQ.)APPROX. WEIGHT (LB) MIN. MAX. 170D .625 (15.88) .750 (19.05)3.05(77.47) .071171 .750 (19.05) .875 (22.23) .085 172 .875 (22.23) 1.000 (25.40) .094 17324C.750 (19.05) .875 (22.23)1 1/2-28UN1.555(39.50) 1.546(39.27)1.640(41.66) 1.620(41.
40、15)1.125(28.58) 1.78(45.21) .065174 .875 (22.23) 1.000 (25.40) .079 175 1.000 (25.40) 1.125 (28.58) .056 176D.750 (19.05) .875 (22.23)2.55(64.77) .068177 .875 (22.23) 1.000 (25.40) .083 178 1.000 (25.40) 1.125 (28.58) .093 179C.750 (19.05) .875 (22.23)1.625(41.28) 2.28(57.91) .068180 .875 (22.23) 1.
41、000 (25.40) .082 181 1.000 (25.40) 1.125 (28.58) .058 182D.750 (19.05) .875 (22.23)3.05(77.47) .076183 .875 (22.23) 1.000 (25.40) .094 184 1.000 (25.40) 1.125 (28.58) .104 REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. 1. DESIGN: CONNECTOR ADAPTERS SHA
42、LL BE DESIGNED IN ACCORDANCE WITH FIGURE 1 AND TABLE 2. DIMENSIONS ARE IN INCHES AND APPLY AFTER PLATING. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MM. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. ALL DIAMETERS ARE CONCENTRIC WITHIN .006 (.15
43、) TIR. FUNCTION SYMBOLS ARE AS FOLLOWS: A=RFI AND ENVIRONMENTAL WITH GLAND NUT B=RFI AND ENVIRONMENTAL WITH STRAIN RELIEF CLAMP C=RFI WITH GLAND NUT D=RFI WITH STRAIN RELIEF CLAMP 2. MATERIALS: FINISH: 175 C-CADMIUM PLATE OVER NICKEL, OLIVE DRAB IN COLOR (500 HR CORROSION) SEALS AND O-RINGS: SILICON
44、E RUBBER IN ACCORDANCE WITH AS81511. BODY AND SADDLES: ALUMINUM ALLOY IN ACCORDANCE WITH AS81511. SCREWS: IN ACCORDANCE WITH NASM35275 APPLICATION NOTES: 1. AS81511 CONNECTORS AND ACCESSORIES ARE NOT RECOMMENDED FOR NEW DESIGN. SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAI
45、NS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
