1、Copyright 2000 Society of Automotive Engineers, Inc. Printed in the U.S.A.All rights reserved. .TO PLACE A DOCUMENT ORDER: (724) 776-4970 FAX: (724) 776-0790 SAE WEB ADDRESS: http:/www.sae.org400 Commonwealth Drive, Warrendale, PA 15096-0001SAETechnicalStandardsBoard Rulesprovide that: “Thisreportis
2、published bySAEto advance the state of technicaland engineering sciences.The use of thisreport isentirelyvoluntary,anditsapplicabilityand suitabilityforanyparticularuse, including anypatent infringement arising therefrom, isthe soleresponsibilityof theuser.”SAEreviewseach technicalreport atleast eve
3、ryfiveyearsat which time itmaybe reaffirmed, revised,orcancelled. SAEinvitesyourwritten commentsand suggestions.SHEET 1 OF 6AMS-I-23053/3THIRD ANGLE PROJECTIONAMS SPECIFICATIONAMS-I-23053/3ISSUED 2000-06INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID,CROSSLINKED AND N
4、ON-CROSSLINKEDPREPARED BY SAE COMMITTEE AMS-CEFEDERAL SUPPLY CLASS 5970NOTICETHIS DOCUMENT HAS BEEN TAKEN DIRECTLY FROM U.S. MILITARY SPECIFICATION MIL-I-23053/3A, AMENDMENT 1, NOTICE 1 AND CONTAINS ONLY MINOR EDITORIAL AND FORMAT CHANGES REQUIRED TO BRING IT INTO CONFORMANCE WITH THE PUBLISHING REQ
5、UIREMENTS OF SAE TECHNICAL STANDARDS. THE INITIAL RELEASE OF THIS DOCUMENT IS INTENDED TO REPLACE MIL-I-23053/3A, AMENDMENT 1, NOTICE 1. ANY PART NUMBERS ESTABLISHED BY THE ORIGINAL SPECIFICATION REMAIN UNCHANGED.THE ORIGINAL MILITARY SPECIFICATION WAS ADOPTED AS AN SAE STANDARD UNDER THE PROVISIONS
6、 OF THE SAE TECHNICAL STANDARDS BOARD (TSB) RULES AND REGULATIONS (TSB 001) PERTAINING TO ACCELERATED ADOPTION OF GOVERNMENT SPECIFICATIONS AND STANDARDS. TSB RULES PROVIDE FOR (A) THE PUBLICATION OF PORTIONS OF UNREVISED GOVERNMENT SPECIFICATIONS AND STANDARDS WITHOUT CONSENSUS VOTING AT THE SAE CO
7、MMITTEE LEVEL, AND (B) THE USE OF THE EXISTING GOVERNMENT SPECIFICATION OR STANDARD FORMAT.UNDER DEPARTMENT OF DEFENSE POLICIES AND PROCEDURES, ANY QUALIFICATION REQUIREMENTS AND ASSOCIATED QUALIFIED PRODUCTS LISTS ARE MANDATORY FOR DOD CONTRACTS. ANY REQUIREMENT RELATING TO QUALIFIED PRODUCTS LISTS
8、 (QPLS) HAS NOT BEEN ADOPTED BY SAE AND IS NOT PART OF THIS SAE TECHNICAL DOCUMENT.400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID,CROSSLINKED AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/3SHEET 2 OF 6AMS-I-23053/3TH
9、E COMPLETE REQUIREMENTS FOR PROCURING THE SLEEVING DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE ISSUE IN EFFECT OF MIL-I-23053.INACTIVE FOR NEW DESIGNREQUIREMENTS:THESE SLEEVINGS SHALL BE EXCLUDED FROM USE IN ALL SPACE VEHICLES, ALL AIRCRAFT, AND IN ENCLOSURES WHICH ARE SEALED OR PRIMARIL
10、Y DEPENDENT ON RECIRCULATED ATMOSPHERE FOR COOLING.CONTINUOUS OPERATING TEMPERATURE RANGE: -20C (-4F) TO +105C (221F).CLASSIFICATION: THE HEAT SHRINKABLE SLEEVING SHALL BE FURNISHED IN THE FOLLOWING CLASSES, AS SPECIFIED:CLASS 1 - CROSSLINKEDCLASS 2 - NON-CROSSLINKEDCOLOR: THE SLEEVING SHALL BE FURN
11、ISHED IN THE COLOR SPECIFIED BY THE PROCURING ACTIVITY AND IN CLEAR. COLORS SHALL CONFORM TO CLASS I OF MIL-STD-104.LONGITUDINAL CHANGE: +1-10%MILITARY PART NUMBER: THE MILITARY PART NUMBER SHALL CONSIST OF THE BASIC NUMBER OF THIS SPECIFICATION SHEET AND DASH NUMBERS AS SHOWN BELOW:EXAMPLE: CLASS 1
12、, RED, 0.063 INCH AS SUPPLIELD ID SLEEVING SHALL BE IDENTIFIED AS M23053/3-102-2.400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID,CROSSLINKED AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/3SHEET 3 OF 6AMS-I-23053/3TABL
13、E I. CONSTRUCTION DETAILS (INCHES) 1/UNRESTRICTED SHRINKAGE: TEST METHOD 4.6.5; CLASS 1, 200 2C (392 4F) FOR 5 MINUTES; CLASS 2, 135 2C (275 4F) FOR 5 MINUTES.400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID,CROSSLINKED
14、AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/3SHEET 4 OF 6AMS-I-23053/3TABLE II. PHYSICAL PROPERTIES 1/400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID,CROSSLINKED AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/3SHEE
15、T 5 OF 6AMS-I-23053/3TABLE II. PHYSICAL PROPERTIES 1/ (CONTINUED)400 Commonwealth Drive, Warrendale, PA 15096-0001INSULATION SLEEVING, ELECTRICAL, HEATSHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID,CROSSLINKED AND NON-CROSSLINKEDAMS SPECIFICATIONAMS-I-23053/3SHEET 6 OF 6AMS-I-23053/3SHELF LIFE CONDITIONS: STORAGE AT 40C (104F) FOR 1 YEAR. CONFORMANCE TO 3.6.INTENDED USE: HEAT SHRINKABLE PVC SLEEVING IS INTENDED FOR LIGHT DUTY HARNESSING OR WIRE BUNDLING.
