1、NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards Organization NFPA 80 Standard for Fire Doors and Other Opening Protectives Handbook 2016 . 80 NFPA , 1 Batterymarch Park, Quincy, MA 02169-7471, USA An International Codes and Standards OrganizationNFPA, 1 Batterym
2、arch Park, Quincy, MA 02169-7471 An International Codes and Standards Organization NFPA 80 Standard for Fire Doors and Other Opening Protectives Handbook 2016 Third Edition Annotated by Kristin C. Bigda, P .E. Copyright 2015National Fire Protection AssociationOne Batterymarch Park Quincy, Massachuse
3、tts 02169-7471 All rights reserved. About this Handbook Edition This PDF contains the complete 2016 edition of NFPA 80, Standard for Fire Doors and Other Open- ing Protectives, annotated to assist the readers understanding of the standards language and the intent behind it. The annotations are not p
4、art of the NFPA Standard but provide a valuable com- mentary reflecting the views, explanations, and insights of authors and contributors selected by the NFPA based on their knowledge of and experience with the standard. How to Navigate Between the Text of the Standard and the Annotations Navigate b
5、etween code or standard text and annotations by using hyperlinked icons and code numbers. While in code or standard text, click on hyperlinked s icon* to the left of the standard sec- tion to navigate to corresponding annotations. Click on the hyperlinked annotative standard section number 1.1 to re
6、turn to previous standard section. *Please note, only the sections featuring icons contain annotations. For longer blocks of annotations, it is recommended that you enable the back arrow functional- ity in Acrobats page navigation menu, which will also allow you to return to the previous stan- dard
7、section. How to Ensure You Have the Most Up-to-date Version of the NFPA Standard The NFPA Standard, in the edition contained herein, is current as of the effective date des- ignated at the time the standard was issued 2014. This Handbook Edition does not, however, include errata, tentative interim a
8、mendments (TIAs), or formal interpretations (FIs) that may have been issued after the effective date. For all errata, TIAs, or FIs that may have been issued since the effective date, or for any new editions that may have superseded this edition, please visit the “Document Information pages” link for
9、 the relevant NFPA Standard located in the “Codes email: stds_adminnfpa.org. For more information about NFPA, visit the NFPA website at www.nfpa.org. IMPORTANT NOTICES AND DISCLAIMERS CONCERNING THE HANDBOOK EDITION Notice and Disclaimer Concerning Liability Publication of this Handbook Edition is f
10、or the purpose of circulating information and opinion among those concerned for fire and electrical safety and related subjects. While ever y effort has been made to achieve a work of high quality, neither the NFPA nor the contributors to this Handbook Edition guarantee the accuracy or completeness
11、of or assume any liability in connec- tion with the information and opinions contained in this Handbook Edition. The NFPA and the contributors shall in no event be liable for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compen
12、satory, directly or indirectly resulting from the publication, use of, or reliance upon this Handbook Edition. This Handbook Edition is published with the understanding that the NFPA and the contribu- tors to this Handbook Edition are supplying information and opinion but are not attempting to rende
13、r engineering or other professional services. If such services are required, the assistance of an appropriate professional should be sought. NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), includ- ing the NFPA Standard that is the subject of this Handbook Edition, are ma
14、de available for use subject to Important Notices and Disclaimers Concerning NFPA Standards, which are separately bookmarked and viewable in this Handbook Edition, and which can also be viewed at www.nfpa. org/disclaimers. Notice Concerning Interpretations Contained in the Annotations NFPA codes, st
15、andards, recommended practices, and guides (“NFPA Standards”), including the NFPA Standard that is the subject of this Handbook Edition are developed in accordance with the published procedures of the NFPA by technical committees comprised of volunteers drawn from a broad array of relevant interests
16、. In this Handbook Edition the text of the NFPA Standard is accompanied with annotations providing explanation and commentary on the meaning and intent of the Standard. The annotations contained in this Handbook Edition are not a part of the NFPA Standard and do not constitute Formal Interpretations
17、 of the NFPA (which can be obtained only through requests processed by the responsible technical committees in accordance with the published procedures of the NFPA). The annotations, therefore, solely reflect the personal opinions of the author or other contributors and do not necessarily represent
18、the official position of the NFPA or its technical committees. ISBN: 978-145591276680-1 NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169. Copyright 2015 National Fire Protection Association . All Rights R
19、eserved. NFPA 80 Standard for Fire Doors and Other Opening Protectives 2016 Edition This edition of NFPA 80, Standard for Fire Doors and Other Opening Protectives, was prepared by the Technical Committee on Fire Doors and Windows. It was issued by the Standards Council on May 26, 2015, with an effec
20、tive date of June 15, 2015, and supersedes all previous editions. This edition of NFPA 80 was approved as an American National Standard on June 15, 2015. Origin and Development of NFPA 80 The Standard for Fire Doors and Other Opening Protectives can be traced to the early days of the NFPA. Reports c
21、overing various phases of the problems of protectives for openings were submitted to the Association by several of the committees concerned and were adopted in 1897, 1898, 1899, 1900, 1901, 1902, and 1908. In 1911, a standard on door openings was presented and adopted, and in 1912, Rules for Fire Pr
22、otection Coverings for Openings in Walls and Partitions on the Interior of Buildings was adopted. In 1915, the existing rules were recodied and reorganized. In 1916, the committee in charge of this document was renamed the Committee on Protection of Openings in Walls and Partitions. Revisions recomm
23、ended by the committee were adopted by the NFPA in 1916, 1917, 1918, 1926, 1927, 1928, 1931, 1937, and 1941. In 1955, the committee was renamed the Committee on Fire Doors and Windows. In 1959, a complete revision of the 1941 edition, including changing the title to correspond with the name of the c
24、ommittee, was adopted. The standard was revised again in 1961, 1962, 1965, 1966, 1967, 1968, 1970, 1973, 1974, 1975, 1977, 1979, 1981, 1983, 1986, and 1990. In 1992, the committee changed the title of the document to Standard for Fire Doors and Fire Windows. Major changes in the 1992 edition include
25、d additions to the standard that recognized the technological changes in glazing materials for re barrier openings and appendix material on radiant heat transfer. Radiant heat transfer, while not included in the performance requirements for re doors and re windows, is a consideration in the design o
26、f re barriers. The 1995 edition reorganized Chapter 2 for better usability, with many changes to improve consistency. Appendix J was updated to provide more current information on radiant heat transfer. The chapters were reorganized in the 1999 edition to correlate the section numbers and their requ
27、irements. Requirements that are common to all doors, such as clearances and detection, were moved to Chapter 1. The 2007 edition included a major reorganization in accordance with the Manual of Style for NFPA Technical Committee Documents and a title change to accommodate the broader scope of the do
28、cument. (The 8-year gap between the 1999 and 2007 editions was due to NFPA 80 being returned to committee during the Fall 2002 revision cycle.) New chapters on fabric re safety curtains and the installation, testing, and maintenance of re dampers were added. Major technical changes pertained to the
29、maximum clearance permitted under the bottom of doors, new provisions regarding the care and maintenance of re doors and re windows, the option for developing performance-based maintenance activities provisions, and provisions regarding chute doors, re shutters, rolling steel doors, and service coun
30、ter doors. New information concerning oor re door assemblies and ratings associated with glazing materials also was added. The 2010 edition included technical changes for the installation of glazing material in vision panel for new wood doors, installation of glazing and light kits, repair of doors
31、and windows, operation of chute doors, and replacement provisions. The terms re protection glazing and re resistance glazing were made consistent throughout the document to clarify the distinctions between re protection glazing and re resistance glazing. Updates also were made to several denitions in s
