欢迎来到麦多课文档分享！ | 帮助中心海量文档，免费浏览，给你所需，享你所想！

麦多课文档分享

热门搜索：

上传我的资源

首页

专题

新闻中心

公告

麦多课文档分享 > 资源分类 > 标准规范 > 国际标准 > BS

国际标准,IEC,ISO,IEEE,JIS,ANSI,AS,EU,BS,GOST,IEC,IEEE,ISA,JASO,JIS,NASM资源 (共32716 份)

用时:19ms

资源分类：: 全部标准规范教学课件考试资料办公文档学术论文行业资料易语言源码

二级分类：: 全部国家标准行业标准地方标准企业标准国际标准规章制度

三级分类：: 全部 ANSI AS API ARMY BS EU GOST ASD DIN IEC IEEE ISA JASO JIS NASM ASTM 其他

资源格式：: 不限 doc ppt pdf 图片 flash 视频音频

上传时间：: 不限三天内一周内一个月内一年内

BS EN 12582-1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC ELSD《表面活性.pdf

下载积分： 10000 积分

BS EN 12582-1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC ELSD《表面活性.pdf

BS EN 12580-2013 Soil improvers and growing media Determination of a quantity《土壤改良剂和生长介质量值的测定》.pdf

下载积分： 10000 积分

BS EN 12580-2013 Soil improvers and growing media Determination of a quantity《土壤改良剂和生长介质量值的测定》.pdf

BS EN 12579-2013 Soil improvers and growing media Sampling《土壤改良剂和生长基质取样》.pdf

下载积分： 10000 积分

BS EN 12579-2013 Soil improvers and growing media Sampling《土壤改良剂和生长基质取样》.pdf

BS EN 12576-1998 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC BMC and DMC《塑料纤维增强复合物 SMC、BMC和DMC的压缩模制试验板的预先制备》.pdf

下载积分： 10000 积分

BS EN 12576-1998 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC BMC and DMC《塑料纤维增强复合物 SMC、BMC和DMC的压缩模制试验板的预先制备》.pdf

BS EN 12575-1998 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC《塑料热固模塑复合物 SMC中纤维浸湿度测定》.pdf

下载积分： 10000 积分

BS EN 12575-1998 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC《塑料热固模塑复合物 SMC中纤维浸湿度测定》.pdf

BS EN 12574-3-2017 Stationary waste containers Safety and health requirements《固定的废弃物容器安全和健康要求》.pdf

下载积分： 10000 积分

BS EN 12574-3-2017 Stationary waste containers Safety and health requirements《固定的废弃物容器安全和健康要求》.pdf

BS EN 12574-2-2017 Stationary waste containers Performance requirements and test methods《固定的废弃物容器性能要求和试验方法》.pdf

下载积分： 10000 积分

BS EN 12574-2-2017 Stationary waste containers Performance requirements and test methods《固定的废弃物容器性能要求和试验方法》.pdf

BS EN 12574-1-2017 Stationary waste containers Containers with a capacity up to 10 000 l with flat or dome lid(s) for trunnion double trunnion or pocket lifting device Dimensions a.pdf

下载积分： 10000 积分

BS EN 12574-1-2017 Stationary waste containers Containers with a capacity up to 10 000 l with flat or dome lid(s) for trunnion double trunnion or pocket lifting device Dimensions a.pdf

BS EN 12573-4-2000 Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints《焊接非静压热塑罐法兰接头的设计和计算》.pdf

下载积分： 10000 积分

BS EN 12573-4-2000 Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints《焊接非静压热塑罐法兰接头的设计和计算》.pdf

BS EN 12573-3-2000 Welded static non-pressurized thermoplastic tanks - Design and calculation for single skin rectangular tanks《焊接非静压热塑罐单层矩形罐的设计和计算》.pdf

下载积分： 10000 积分

BS EN 12573-3-2000 Welded static non-pressurized thermoplastic tanks - Design and calculation for single skin rectangular tanks《焊接非静压热塑罐单层矩形罐的设计和计算》.pdf

BS EN 12573-2-2000 Welded static non-pressurized thermoplastic tanks - Calculation of vertical cylindrical tanks《焊接非静压热塑罐立式圆柱形罐的计算》.pdf

下载积分： 10000 积分

BS EN 12573-2-2000 Welded static non-pressurized thermoplastic tanks - Calculation of vertical cylindrical tanks《焊接非静压热塑罐立式圆柱形罐的计算》.pdf

BS EN 12573-1-2000 Welded static non-pressurized thermoplastic tanks - General principles《焊接非静压热塑罐一般原理》.pdf

下载积分： 10000 积分

BS EN 12573-1-2000 Welded static non-pressurized thermoplastic tanks - General principles《焊接非静压热塑罐一般原理》.pdf

BS EN 12572-3-2017 Artificial climbing structures Safety requirements and test methods for climbing holds《人造攀登结构攀登支撑点用试验方法和安全性要求》.pdf

下载积分： 10000 积分

BS EN 12572-3-2017 Artificial climbing structures Safety requirements and test methods for climbing holds《人造攀登结构攀登支撑点用试验方法和安全性要求》.pdf

BS EN 12572-2-2017 Artificial climbing structures Safety requirements and test methods for bouldering walls《人造攀岩结构第2部分鹅卵石墙面的试验方法和安全性要求》.pdf

下载积分： 10000 积分

BS EN 12572-2-2017 Artificial climbing structures Safety requirements and test methods for bouldering walls《人造攀岩结构第2部分鹅卵石墙面的试验方法和安全性要求》.pdf

BS EN 12572-1-2017 Artificial climbing structures Safety requirements and test methods for ACS with protection points《人造攀登结构有防护点的施工现场组合装置(ACS)安全性要求和试验方法》.pdf

下载积分： 10000 积分

BS EN 12572-1-2017 Artificial climbing structures Safety requirements and test methods for ACS with protection points《人造攀登结构有防护点的施工现场组合装置(ACS)安全性要求和试验方法》.pdf

BS EN 12571-1999 Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and .pdf

下载积分： 10000 积分

BS EN 12571-1999 Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and .pdf

BS EN 12570-2000 Industrial valves - Method for sizing the operating element《工业阀门操作元件尺寸控制方法》.pdf

下载积分： 10000 积分

BS EN 12570-2000 Industrial valves - Method for sizing the operating element《工业阀门操作元件尺寸控制方法》.pdf

BS EN 12569-1999 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests《工业阀门化学和石油化学工艺工业阀门要求和试验》.pdf

下载积分： 10000 积分

BS EN 12569-1999 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests《工业阀门化学和石油化学工艺工业阀门要求和试验》.pdf

BS EN 12568-2010 Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts《脚和腿的保护物鞋头和抗金属刺入的插入物要求和试验方法》.pdf

下载积分： 10000 积分

BS EN 12568-2010 Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts《脚和腿的保护物鞋头和抗金属刺入的插入物要求和试验方法》.pdf

BS EN 12567-2000 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests《工业阀门液化天然气用隔离阀适用性验证试验规范》.pdf

下载积分： 10000 积分

BS EN 12567-2000 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests《工业阀门液化天然气用隔离阀适用性验证试验规范》.pdf

BS EN 12566-7-2016 Small wastewater treatment systems for up to 50 PT Prefabricated tertiary treatment units《高达50 PT的小型废水处理系统预制三级处理装置》.pdf

下载积分： 10000 积分

BS EN 12566-7-2016 Small wastewater treatment systems for up to 50 PT Prefabricated tertiary treatment units《高达50 PT的小型废水处理系统预制三级处理装置》.pdf

BS EN 12566-6-2016 Small wastewater treatment systems for up to 50 PT Prefabricated treatment units for septic tank effluent《高达50 PT的小型废水处理系统化粪池污水用预制处理装置》.pdf

下载积分： 10000 积分

BS EN 12566-6-2016 Small wastewater treatment systems for up to 50 PT Prefabricated treatment units for septic tank effluent《高达50 PT的小型废水处理系统化粪池污水用预制处理装置》.pdf

BS EN 12566-4-2016 Small wastewater treatment systems for up to 50 PT Septic tanks assembled in situ from prefabricated kits《50PT以下的小型废水处理系统第4部分预制成套工具就地组装的化粪池》.pdf

下载积分： 10000 积分

BS EN 12566-4-2016 Small wastewater treatment systems for up to 50 PT Septic tanks assembled in situ from prefabricated kits《50PT以下的小型废水处理系统第4部分预制成套工具就地组装的化粪池》.pdf

BS EN 12566-3-2016 Small wastewater treatment systems for up to 50 PT Packaged and or site assembled domestic wastewater treatment plants《小于50 PT的小型废水处理系统包装的和或现场装配的生活废水处理设备》.pdf

下载积分： 10000 积分

BS EN 12566-3-2016 Small wastewater treatment systems for up to 50 PT Packaged and or site assembled domestic wastewater treatment plants《小于50 PT的小型废水处理系统包装的和或现场装配的生活废水处理设备》.pdf

BS EN 12566-1-2016 Small wastewater treatment systems for up to 50 PT Prefabricated septic tanks《高达50PT的小型废水处理系统预制化粪池》.pdf

下载积分： 10000 积分

BS EN 12566-1-2016 Small wastewater treatment systems for up to 50 PT Prefabricated septic tanks《高达50PT的小型废水处理系统预制化粪池》.pdf

BS EN 12562-1999 Textiles - Para-aramid multifilament yarns - Test methods《纺织品对芳香聚酰胺复丝纱线试验方法》.pdf

下载积分： 10000 积分

BS EN 12562-1999 Textiles - Para-aramid multifilament yarns - Test methods《纺织品对芳香聚酰胺复丝纱线试验方法》.pdf

BS EN 12561-8-2011 Railway applications Tank wagons Heating connections《轨道交通油罐车加热连接装置》.pdf

下载积分： 10000 积分

BS EN 12561-8-2011 Railway applications Tank wagons Heating connections《轨道交通油罐车加热连接装置》.pdf

BS EN 12561-7-2011 Railway applications Tank wagons Platforms and ladders《轨道交通油罐车月台和梯架》.pdf

下载积分： 10000 积分

BS EN 12561-7-2011 Railway applications Tank wagons Platforms and ladders《轨道交通油罐车月台和梯架》.pdf

BS EN 12561-6-2011 Railway applications Tank wagons Manholes《轨道交通油罐车检查孔》.pdf

下载积分： 10000 积分

BS EN 12561-6-2011 Railway applications Tank wagons Manholes《轨道交通油罐车检查孔》.pdf

BS EN 12561-5-2011 Railway applications Tank wagons Devices for vapour return while filling or emptying of liquid products《轨道交通油罐车液态产品装卸时蒸汽回流装置》.pdf

下载积分： 10000 积分

BS EN 12561-5-2011 Railway applications Tank wagons Devices for vapour return while filling or emptying of liquid products《轨道交通油罐车液态产品装卸时蒸汽回流装置》.pdf

BS EN 12561-4-2011 Railway applications Tank wagons Devices for top filling and emptying of liquid products《轨道交通油罐车液态产品用顶部装卸装置》.pdf

下载积分： 10000 积分

BS EN 12561-4-2011 Railway applications Tank wagons Devices for top filling and emptying of liquid products《轨道交通油罐车液态产品用顶部装卸装置》.pdf

BS EN 12561-3-2011 Railway applications Tank wagons Bottom filling and emptying devices for gases liquefied under pressure《轨道交通油罐车压力下液化气用底部装卸式装置》.pdf

下载积分： 10000 积分

BS EN 12561-3-2011 Railway applications Tank wagons Bottom filling and emptying devices for gases liquefied under pressure《轨道交通油罐车压力下液化气用底部装卸式装置》.pdf

BS EN 12561-2-2011 Railway applications Tank wagons Bottom emptying devices for liquid products including vapour return《轨道交通油罐车包括回流蒸气的液体产品用底卸式装置》.pdf

下载积分： 10000 积分

BS EN 12561-2-2011 Railway applications Tank wagons Bottom emptying devices for liquid products including vapour return《轨道交通油罐车包括回流蒸气的液体产品用底卸式装置》.pdf

BS EN 12561-1-2011 Railway applications Tank wagons Identification plates for tank wagons for the carriage of dangerous goods《轨道交通油罐车危险物品运输用槽罐车的识别板》.pdf

下载积分： 10000 积分

BS EN 12561-1-2011 Railway applications Tank wagons Identification plates for tank wagons for the carriage of dangerous goods《轨道交通油罐车危险物品运输用槽罐车的识别板》.pdf

BS EN 12560-7-2004 Flanges and their joints - Gaskets for class-designated flanges - Covered metal jacketed gaskets for use with steel flanges《法兰及其接头分级标示法兰用垫圈钢法兰用涂覆金属的套层垫圈》.pdf

下载积分： 10000 积分

BS EN 12560-7-2004 Flanges and their joints - Gaskets for class-designated flanges - Covered metal jacketed gaskets for use with steel flanges《法兰及其接头分级标示法兰用垫圈钢法兰用涂覆金属的套层垫圈》.pdf

BS EN 12560-6-2003 Flanges and their joints - Gaskets for class-designated flanges - Covered serrated metal gaskets for use with steel flanges《法兰及其连接件标示等级的法兰用垫圈钢法兰用涂覆的有锯齿金属垫圈》.pdf

下载积分： 10000 积分

BS EN 12560-6-2003 Flanges and their joints - Gaskets for class-designated flanges - Covered serrated metal gaskets for use with steel flanges《法兰及其连接件标示等级的法兰用垫圈钢法兰用涂覆的有锯齿金属垫圈》.pdf

BS EN 12560-5-2001 Flanges and their joints - Gaskets for Class-designated flanges - Metallic ring joint gaskets for use with steel flanges《法兰及其接头标示等级的法兰的衬垫钢法兰用金属环接头衬垫》.pdf

下载积分： 10000 积分

BS EN 12560-5-2001 Flanges and their joints - Gaskets for Class-designated flanges - Metallic ring joint gaskets for use with steel flanges《法兰及其接头标示等级的法兰的衬垫钢法兰用金属环接头衬垫》.pdf

BS EN 12560-4-2001 Flanges and their joints - Gaskets for Class-designated flanges - Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges《法兰及其.pdf

下载积分： 10000 积分

BS EN 12560-4-2001 Flanges and their joints - Gaskets for Class-designated flanges - Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges《法兰及其.pdf

BS EN 12560-3-2001 Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic PTFE envelope gaskets《法兰及其接头标示等级的法兰衬垫非金属PTFE外壳衬垫》.pdf

下载积分： 10000 积分

BS EN 12560-3-2001 Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic PTFE envelope gaskets《法兰及其接头标示等级的法兰衬垫非金属PTFE外壳衬垫》.pdf

BS EN 12560-2-2013 Flanges and their joints Dimensions of gaskets for Class-designated flanges Spiral wound gaskets for use with steel flanges《法兰及其接头标示等级的法兰衬垫钢法兰用螺旋缠绕衬垫》.pdf

下载积分： 10000 积分

BS EN 12560-2-2013 Flanges and their joints Dimensions of gaskets for Class-designated flanges Spiral wound gaskets for use with steel flanges《法兰及其接头标示等级的法兰衬垫钢法兰用螺旋缠绕衬垫》.pdf

共 32716 条/ 818 页

首页上一页...464 465466467 468...下一页尾页

关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1

收起

展开

QQ交谈